Zebra Technologies Printers user manual Cleaning Under, Sensor Bracket

Page 45

 

Operation

 

 

 

 

Cleaning Under

The transmissive (gap) sensor guide bar bracket

the Sensor Bracket

can pivot up for easy cleaning.

Step 1

Open the print head carriage.

Step 2

Open the sensor bracket. Pull the slide lock to

 

the left and lift the front of the bracket up.

Transmissive (Gap)

Sensor Bracket

Slide Lock

Step 3 Clean the metal part of the bracket, only. The sensor is recessed to protect it from labels and adhesive.

Clean the clear sensor window below the sensor bracket. Do not use abrasive cleaning materials. Only use water on a lint free, clean, damp cloth very lightly moistened. Let dry. Verify that the window is clear of streaks and clouding.

Step 4 Swing the sensor bracket down to close. The slide lock will automatically lock when in posi- tion.

Close the print carriage.

980181-001 Rev.C

37

Image 45
Contents Strata Page Foreword We Need To Hear From You Table of Contents General Cautions and Warnings Media Cautions & Tips Viii Installation Check List 1 Printer Step ➊ Attach Power Check Voltage= Off Parallel Interface Serial Interface Step ➋ Attach Interface Cable= On Step ➌ Apply PowerSoftware Operation Your Printer Ribbon Take-up Spindle Sensor Guide Bar Bracket Operation Operation Status Indicator Loading Labels or Tags Correct Incorrect Operation Operation Media Guides Release Lever Operation Operation Move the media roll to the lower media stand for printing Adjustment Wheel Sensor Position Marker StepSensor Position Operation Windows Users Loading Transfer Ribbons Take-Up Spindles Supply Tracking BarNotch Long Spoke Notch Operation Operation Operation Removing a Partially Used Transfer Ribbon Top Of Form Sensing Dump Mode Sample Printout Operation Operation Cleaning the Print Head Sensor Bracket Cleaning UnderUsing the Label Dispenser Remove slack by pulling the liner Operation Appendix a Troubleshooting Common Printing Problems Troubleshooting Guide Check for Out-of-Media condition or missing Serial Interface Cable Wiring Serial Interface Communication ConfigurationTag Media Sensing PrintDirection Appendix B Printer Features Hardware Options Accessories General Specifications Software and Drivers Bar Codes CodePostnet Communications Interface RibbonsPrinter Features Appendix C Supplies and Accessories Thermal Retail applications where labels are 980181-001 Rev.C Appendix D Using the Media Cutter Specifications Cutter warranty Using the Media Cutter Use tweezers to remove media from the internal blade areas Clear the JamReplace the Cutter Check the Cutter Products