4.Place the RF receiver in a good |
|
| ||
location. |
| Place the receiver at least |
| |
|
| 8 inches (20 cm) from |
| |
|
| electrical devices such |
| |
|
| as the computer or monitor. |
| |
5.Place the keyboard and the mouse |
|
| ||
in the proper location for your |
|
| ||
computer. |
|
| 8 in (20 cm) | |
|
|
| ||
Note! Refer to the section on |
|
| ||
ergonomics later in the quick |
|
| ||
guide for more information on |
|
| ||
setting up your workstation. |
|
| ||
6.Turn on the computer. |
|
| ||
7.Press the Receiver connect button a |
|
| ||
(don't hold | it down), then press the | A | B | |
Mouse connect switch within 3 | ||||
| Connect | |||
seconds. Mouse ID will link in |
| switches | ||
Receiver |
| |||
success.Repeat to press the |
| |||
connect button |
| |||
Receiver connect button, then press |
|
| ||
the Keyboard Connect switch withon |
|
| ||
3 seconds,keyboard ID will link in |
|
| ||
success. |
|
|
| |
|
|
| C | |
Ensure that the mouse and keyboard are working. If they do not respond,pls.move the
mouse or press keystrokes. If not working yet,pls. keep intermission for 15 seconds
at least,then repeat Step 7 to ensure that a connection has been made.For any further
solution, pls.take refer to the Troubleshooting section at the end of this guide.
6