Nortel Networks 209321-A manual Properties dialog box items, Area Description

Chapter 3 Device Manager basics 31

Figure 4 Properties dialog box

2Type information and select check boxes.

3Click OK.

Table 1 describes items in the Properties dialog box.

Table 1 Properties dialog box items

Area	Item	Description
Polling	Status Interval	Interval at which statistics and status information are gathered (default is
		300 seconds).
	(If traps, Status	Interval at which statistics and status information are gathered when traps
	Interval)	are enabled (default is 300 seconds).
	Hotswap Detect	The interval at which Device Manager polls for module information
	every	(default is 600 seconds).
	Enable	Enables (checked) or disables (not checked) periodic polling of the device
		for updated status. If polling is disabled, the switch or stack status is
		updated only when you click Refresh in the chassis window.

Getting Started with the Business Policy Switch 2000 Management Software