Reconnecting the Mouse to the Receiver
This mouse will usually automatically connect to the receiver. If needed, you can connect the mouse to the receiver by following these steps.
1.Press the button on top of the receiver. The LED will light up on the receiver.
2.Press the button on the bottom of the mouse. It is located near the top of the mouse, left side.
3.The LED on the receiver will blink and you are finished.
Storing the Receiver
To help conserve battery and increase portability you may store the receiver under the mouse. To do this, simply unplug the receiver from your USB slot and place it in the designed position on the bottom of the mouse. Once the receiver is correctly in place, the power will automatically shut off.
Using the Laptop Clip
Your mouse is equipped with the Laptop Clip. This is used for easy storage of the mouse while on the go with your laptop. To use this clip, simply insert the clip on the bottom of the mouse then place your mouse into the modem slot on your laptop. Please ensure that your modem slot is not in use before attaching the storage clip.
4