Note: A minimum attenuation of 5 dB must be present between the transmitter and receiver. To avoid receiver saturation, you must insert a minimum attenuation of 5 dB when:
•testing the GBIC in loopback mode
•using short runs of fiber with no intermediate CWDM OADM or CWDM OMUX
To determine the expected signal loss for a CWDM OADM, CWDM OMUX, or fiber length, see Installation and Networking Guidelines for Optical Routing, part number
Given a loss budget of 24 dB and assuming fiber loss of
.25 dB/km, up to 96 km reach is supported with no intermediate CWDM OADM or CWDM OMUX.
Connecting to Nortel Networks online
This section describes products, services, and support systems that can be accessed online.
Hard-copy technical manuals
You can print selected technical manuals and release notes free, directly from the Internet. Go to the www.nortelnetworks.com/ documentation URL. Find the product for which you need documentation. Then locate the specific category and model or version for your hardware or software product. Use Adobe*
12