Nortel Networks manual Nautica 200 Installation Guide

Page 17

Nautica 200 Installation Guide

1.Connect one end of the black ISDN cable (labelled 119071-A) or the red ISDN cable (labelled 117238) to the ISDN port on the back of the Nautica 200. Then, connect the other end of the cable to the ISDN wall outlet.

In North America, instead of the ISDN cables mentioned in point one, you may have an RJ-45 to RJ-11 cable (labelled 119068-A) instead. Connect the RJ-45 end of this cable into the back of the Nautica 200 and the RJ-11 end of the same cable into the ISDN wall outlet.

2.Connect one end of the gray LAN cable (labelled 118314) to the LAN port. Then, connect the other end of the cable to the NIC on the back of your PC.

Note: If you are iunstalling the Australian version (see Figure 2), ignore step 3 and proceed to step 4.

3.Connect one telephony device (telephone, facsimile or modem) to each telephone port. If you are in the UK, you must use the telephone adapters supplied with your Nautica 200. In other countries, you may need to supply your own telephone adapters.

4.Connect the power cable to the port labelled 9v DC. The Nautica 200 has no on/off switch; it turns on immediately when you plug the power adapter into the power outlet.

Warning: Disconnect the ISDN cable from the wall outlet before connecting it to or disconnecting it from the Nautica 200.

5.The Manager port is used for troubleshooting only. The Manager cable is labelled 117239. Connect this cable only if you are an experienced user of Nautica products and

you want to start a local management session with the Bay Command Console (BCC™ ).

117236-B Rev. 00

7

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Nautica 200 Installation Guide Statement of Conditions Copyright 1998 Bay Networks, IncTrademarks USA Requirements Only EC Declaration of Conformity Power SupplyEuropean Requirements Only EN 55 022 StatementVoluntary Control Council for Interference Vcci Statement Port SpecificationsJapan/Nippon Requirements Only Canada CS-03 -- Règles et règlements Canada Requirements OnlyCanada CS-03 Rules and Regulations FCC Part 68 Compliance Statement Rev Vii Viii Bay Networks, Inc. Software License AgreementRev Rev Nautica Installation Guide Checklist Site Preparation Parameter SpecificationEuropean Isdn Information Isdn Ordering InformationNorth American Isdn Information Hardware InstallationConnecting the Cables Nautica 200 Cabling Options All countries except Australia Nautica 200 Installation Guide Minimum Requirements Software InstallationAdditional Information Setting up e-mailFile and Print Sharing Remotely Mapped DrivesFile and Print Sharing Window Graphical FTP Using Keep AliveWeb Browsers

200 specifications

Nortel Networks 200, often referred to simply as Nortel 200, was a significant telecommunications platform introduced in the late 1990s as part of Nortel's push into the enterprise communications market. Designed to cater to small and medium-sized businesses, the Nortel 200 was notable for its versatility, reliability, and scalability.

One of the key features of the Nortel 200 was its modular design, which allowed organizations to customize the system according to their specific needs. This modularity permitted businesses to start with a basic setup and expand it over time, as their requirements grew. Companies could add more lines, features, and functionalities without needing to overhaul the entire system.

The Nortel 200 leverages a range of telecommunications technologies, including digital and analog telephony, which catered to different user preferences and existing infrastructure. It supported both traditional circuit-switched lines and modern Voice over Internet Protocol (VoIP) systems. This flexibility made it an attractive solution for organizations transitioning from older telephone systems to more advanced digital communications.

Another important characteristic of the Nortel 200 was its robust call management capabilities. The system provided features such as call forwarding, voicemail, conferencing, and automated attendant services. These functionalities enhanced productivity and improved communication within organizations, enabling employees to connect more effectively with clients and each other.

In terms of network integration, the Nortel 200 was designed with compatibility in mind. It could easily interface with various third-party applications and services, including customer relationship management (CRM) systems and unified communications platforms. This integration capability ensured that businesses could optimize their communications within their existing workflows.

The Nortel 200 also prioritized security, offering various features to protect sensitive communication. These included encrypted voice lines and secure access protocols, which were essential for organizations in regulated industries.

Overall, the Nortel Networks 200 stood out as a reliable and flexible telecommunications solution for small and medium-sized enterprises. Its modular design, robust feature set, and integration capabilities made it a cornerstone for many businesses looking to improve their communication systems in an increasingly digital world. As organizations continue to evolve, the legacy of the Nortel 200 remains evident in its influence on modern telephony solutions.
Top Page Image Contents