Release Notes for the BayStack 450 10/100/1000 Series Switch
Known Restrictions
The following known restrictions apply to software version V4.0.0 (and earlier versions):
•Software version V4.0.0 does not support
•Software version V4.0.0, running on Rev B hardware (HW: RevB in the System Characteristics screen), does not support the BayStack
•Limited support for EAPOL TLS Certificates
TLS certificates are supported in mixed stacks only.
•Mixed stack configurations
The following restrictions apply to mixed stack configurations:
--If you are managing your mixed stack using a console interface, connect the console to a Business Policy Switch.
--Management VLAN functionality is operational only through ports that are configured as both “ingress” and “egress” members for the management VLAN.
--The following BayStack 450 switch features are not available in a mixed stack configuration:
-SNMP Security
-Save Current Settings
-Support for the BayStack
•System reset due to MultiLink Trunking reconfiguration
If you add a new unit, that is configured with at least one bounded trunk1 (with no distributed trunks2), into a stack that is configured with one or more distributed trunks, the new unit automatically resets before entering the operational mode of the stack.
1Bounded trunk: an active trunk with all trunk members configured on the same module.
2Distributed trunk: an active trunk with trunk members configured on at least two different units within a single stack.
8 |
|