Nortel Networks 100 Chassis manual LEDs Power switch

Installing the Power Supply for the Centillion 100 Chassis

7267

3.Push down on the power supply handle to align the screws and tighten the screws to between 2 and 4 inch-pounds of torque. Do not overtighten.

LEDs

Power switch

7268

4.Connect the power cord to the power supply and then to the wall. (See power cord caution on page 1.)

5.Turn on the power. Verify that the upper (green) LED lights.

For detailed instructions, refer to Installation and Reference for the Centillion 100 Chassis.

4 893-00940-A