Getting Started with the Contivity Extranet Switch 1500 Series
26 |
| B |
|
|
|
27 |
| B |
|
|
|
28 | M2 | no conn |
|
|
|
The following notes apply to the Single V.35 WAN Interface:
•You will need a DSU/CSU (digital service unit/channel service unit) between the WAN connection and the Switch.
•At each end, Cable shield and connector shell must connect respectively to pin A of
•The term “no conn” means the wire is not connected to a pin in the
•Wires 12B, 13A, and 14B connect to pin B in the
•Unused pins in the
•Do not connect Shield to Signal Ground as these are separate signals.
•The pair suffix A or B refers to an individual wire within a twisted pair.