For your protection please read the following

For your protection please read the following:

X1000.5 Owners Manual

Water and moisture: Electrical devices should not be used near water ( as per example, near a bathtub, washbasin, kitchen sink, laundry tub, wet basement or swimming pool ). Care should be taken such that objects do not have the opportunity to fall, and that liquid is never spilled onto or into the device enclosure through openings.

Power Sources: An electrical device must be connected to a mains power source in strict accordance with the supplied product owner’s manual. Please verify that the AC mains voltage specified in the product manual matches those requirements indicated on the unit and the AC voltage provided to your location by the power company.

Grounding: Adequate precautions should be taken so that the grounding provisions built into an electrical product are never defeated.

Power Cords: Pass Laboratories provides a power supply cord that meets all legislated requirements for the market in which the product was originally sold. If you choose to substitute an after-market product we urge you to choose one that is fully safety rated by the necessary local authority.

Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on, abraded, or pinched by items placed on or against them, paying particular attention to cords where they enter plugs or exit from a device. Never under any circumstance insert a cut or damaged power cord into a mains power socket.

Power and Signal: Cables should never be connected / disconnected with equipment powered up. Failure to heed this warning may damage or destroy equipment.

Ventilation: Power-amplifiers run hot, but you should be able to place your hands on them without discomfort. You must allow for this heat in installation, by providing for free air circulation around the product. Electronics should not be subjected to sources of excessive radiant heat. Excessive heat can shorten the life of the product and may cause the electronics to self-protect and shut down.

Servicing: To reduce the risk of fire, electrical shock or other injuries, the user should not attempt to service the device beyond that which is described in the operating instructions. All other servicing must be referred to qualified service personnel.

X1000.5 specifications

Pass Labs X1000.5 is a high-performance power amplifier that has earned a stellar reputation among audiophiles and sound engineers alike for its exceptional sound quality and robust design. Created by renowned audio engineer Nelson Pass, the X1000.5 exemplifies the fundamental principles of Pass Labs: simplicity, purity, and musicality.

At the core of the X1000.5's capabilities is its Class A operation, delivering 1000 watts of power into 8 ohms and effectively doubling that into 4 ohms. This Class A architecture ensures minimal distortion and a linear response, allowing for an incredibly accurate reproduction of sound across the entire frequency spectrum. The soundstage is wide and immersive, enabling listeners to discern subtle details in both music and vocal performances.

One of the standout technologies employed in the X1000.5 is the use of a complementary output stage consisting of high-speed MOSFETs. This allows the amplifier to manage high instantaneous current demands without sacrificing control or transparency. The use of MOSFETs also contributes to a warm and engaging sonic signature that is characteristic of Pass Labs' designs. The amplifier’s circuitry is designed with an emphasis on low negative feedback, which further enhances the natural sound quality.

The build quality of the X1000.5 is equally impressive. Housed in a robust chassis designed to minimize resonance and electromagnetic interference, the amplifier features a dual-mono configuration with separate power supplies for each channel. This not only provides ample power but also ensures channel separation and coherence in sound reproduction. It also incorporates high-quality components such as low ESR capacitors and a custom-made toroidal transformer, which contributes to its excellent performance.

Additional features include an easy-to-use input stage that supports both balanced XLR and single-ended RCA connections, making it compatible with a wide range of source components and speaker systems. The X1000.5 is also equipped with protection circuitry that prevents over-temperature and over-current situations, safeguarding both the amplifier and connected speakers.

In summary, the Pass Labs X1000.5 is a masterful blend of power, precision, and artistry. With its Class A operation, advanced MOSFET technology, solid build quality, and user-friendly features, this amplifier is a compelling choice for audiophiles seeking to elevate their listening experience to new heights.