AG Neovo user manual Hardware Connections, Connecting the LK1800 to a PC keyboard port

Page 6

HARDWARE CONNECTIONS

The LK1800 can be connected to a PS/2 computer, or computer terminal. The following diagram shows how the keyboard connects to the computer and standard keyboard or other keyboard peripheral (magnetic stripe reader, scanner, etc.).

LK1800/LK1800M back panel

To peripheral

To Computer

LK1800U/LK1800MU back panel

To Computer

NOTE: Before making any connections it is always advisable to turn off the computer.

A.Connecting the LK1800 to a PC keyboard port:

1.Use the computer interface cable. Plug the PS/2 Male connectors for the keyboard and mouse into the computer. Connect the RJ11 connector into the “To Computer” connector on the LK1800. (For LK1800U and LK1800MU models connect the USB Type A connector to the computer and then the RJ45 into the “To Computer” connector on the LK1800U.)

2.You may connect your original standard keyboard to the “To Peripheral” connector on the LK1800. This port can also be used for peripherals that use a PS/2 interface.

6

LK1800 User Manual Rev. 1

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LK1800 series FCC Notice Table of Contents Features Carton Contents ModelsConnecting the LK1800 to a PC keyboard port Hardware ConnectionsFunctional Test Utility Disk Contents Installing the LCI Keyboard Programming Utility UtilityMenu Commands Programming the Keyboard Checking Key Definitions Editing KEY DefinitionsSelecting Keys to Edit Selecting Programming ModesAscii Code Mode Special Features Multi-Shift-Level FunctionInter-string Delay Modifying Properties of the Keyboard Exporting a Delimited Text File Delimited Text Template FileImporting a Delimited Text File Click on Template→Export Text DataKEY Label Color Page Inter-string Delay Programming ExamplesMulti-Shift-Level Function Symbol Function Key’s Name Token Names for Special Function KeysPage Page Page Page Specifications
Top Page Image Contents