American Dynamics AD2089 Connections for Cable Distance of Seven Feet or Less, Power Connections

Page 13

Connection and Setup of the AD2089

Connections for Cable Distance of Seven Feet or Less

For switching system connections where keyboard-to-system cable distance is seven feet or less, make the following connections using the jumpers included with the dual terminal block

J1 Pins

 

J2 Pins

4 (rcd)

5

(xmit)

 

 

 

5 (xmit)

4

(rcd)

 

 

 

7 (ground)

7

(ground)

 

 

 

After connecting the jumpers, connect one of the seven foot modular cables from the J2 (system) jack of the dual terminal block, to the appropriate RS-232 port on the switching system. Connect the other seven foot modular cable from the J1(keyboard) jack of the dual terminal block, to the RJ-45 jack of the keyboard.

Connections for Cable Distance of Greater than Seven Feet

For switching system connections where keyboard-to-system cable distance is greater than seven feet, the following components are required.

Dual terminal block supplied with the AD2089

A three-wire, shielded, 18 AWG cable supplied by the installer

Single terminal block supplied with the AD2089

Use the three-wire cable to connect the keyboard and switching system terminal blocks. The following table provides the connection points

Dual Block (J1 Side) Screws

 

Single Block Screws

4 (rcd)

5

(xmit)

 

 

 

5 (xmit)

4

(rcd)

 

 

 

7 (ground)

7

(ground)

 

 

 

The cable shield connects to Pin 2 of the single terminal block

After connecting the three-wire cable to the respective terminal blocks, connect one of the seven foot modular cables supplied with the AD2089 from the J1(keyboard) jack of the dual terminal block to the RJ-45 jack of the keyboard. Connect the other seven foot modular cable from the RJ- 45 jack of the single terminal block to the appropriate RS-232 port on the switching system.

Power Connections

Depending on national and local electrical requirements, the AD2089 is supplied with either a 120 VAC or a 230 VAC transformer. The 230 VAC transformer is supplied with a Euro-style IEC 320 type inlet. An appropriate detachable cord should be connected between the IEC 320 inlet and the power source.

Connect the output leads from the wall transformer to screws 1 and 8 on the J1(keyboard) side of the dual terminal block. All power to the AD2089 is supplied from this connection.

CAUTION!

DO NOT INSERT THE WALL TRANSFORMER

INTO THE POWER SOURCE UNTIL ALL

CONNECTIONS HAVE BEEN VERIFIED

Note

Typical system and test connections are illustrated in Appendix C of this manual.

5

Image 13
Contents Keyboard Operator’s Manual Copyright Customer Service TrademarksRack Mounting License Information Contents Software License Agreement Monitor Arming Commands Macro Key Labels Macro Programming Worksheets Contents AD2089 Keyboard Controller AD2089 FeaturesAD2089 Keyboard Overview Multi-Function Keys Connecting to a Switching System Connection and Setup of the AD2089Supplied Equipment Screw FunctionJ1 Pins J2 Pins Power ConnectionsConnections for Cable Distance of Seven Feet or Less Connections for Cable Distance of Greater than Seven FeetInstallation Precautions Setting Keyboard Parameters Keyboard SetupTo Set the Pan / Tilt / Zoom Motion Control Option Resetting Keyboard ParametersBuilt-in Keyboard Operations Test Procedure to Initiate Built-In TestLED Lamp Test Speaker TestLED Brightness Test Seven Segment LED TestDisplay Number of Keys Selection Key Functionality TestSerial Communications Test Keyswitch TestROM Checksum Test Connection and Setup of the AD2089 Selection of Monitor or Dvms Mode of Operation Using the AD2089 in Operate ModeUser Numbers and Passcodes Logging On to the SystemCalling a Camera to View on a Monitor Selecting MonitorsControlling a Cameras Pan and Tilt Controlling Camera Zoom Locking and Unlocking a CameraControlling Camera Focus Controlling the Camera IrisControlling Camera Flip Calling Presets ShotsAuto Focus / Auto Iris Running System ToursRe-Starting a Tour on Hold Holding a TourChanging Tour Direction Calling SalvosViewing Satellite Sites Acknowledging AlarmsRunning Patterns Running a Macro Dvms Function KEY Label Selecting DVRsSetting Presets Using the AD2089 in Program ModeSetting Scratch Pad Tours Programming with the AD2089Clearing Patterns Defining PatternsArming a Monitor Disarming a MonitorMacro Examples Programming MacrosAdvanced Macro Examples Synchronization of Macro Programming Example 2 Quick ACKKeyboard to CPU Transfer CPU to Keyboard Transfer Deleting MacrosUsing the AD2089 in Menu Mode Programming with the AD2089 References Keyboard SpecificationsCommunications Central ProcessorProblem Check List Appendix B TroubleshootingAD2089 Appendix C Typical System ConnectionsAD2089 Keyboard to AD1024 CPU AD2089 Keyboard to AD1024 CPU AD2089 Keyboard to AD2150 AD2089 Keyboard to AD2150 AD2089 AD2089 AD2089 Keyboard to AD168AD2089 Keyboard to AD168 AD2089 to MegaPower Built-in Test Connection Appendix D Software License Agreement Software License Agreement Software License Agreement Monitor Arming Codes Monitor Acronym Command Sequence Appendix E Monitor Arming CommandsAD2089 Operator’s Manual Macro Key Labels Macro Key Labels Macro Programming Worksheets Macro Programming Workskeet Glossary Auxiliary and momentary relay System tour Glossary Tilt Up and down camera movement Tour

AD2089 specifications

The American Dynamics AD2089 is a cutting-edge surveillance camera designed for versatile security applications. Integrating advanced technology and user-friendly features, it stands out as an ideal choice for monitoring both indoor and outdoor environments.

One of the principal features of the AD2089 is its high-resolution imaging capability. It supports up to 1080p full HD video, ensuring that the captured footage is clear and detailed, which is crucial for effective surveillance. The camera is equipped with a 2.8 to 12mm varifocal lens, offering adjustable focal lengths that allow users to customize the field of view according to their specific monitoring needs. This flexibility is particularly beneficial in dynamic environments where the focus may shift frequently.

Another significant characteristic of the AD2089 is its robust low-light performance, thanks to its advanced infrared (IR) capabilities. The camera can function effectively in total darkness, providing night vision support that captures clear images even in minimal lighting conditions. This feature enhances overall security, especially during nighttime when criminal activity is more likely to occur.

The AD2089 also incorporates intelligent video analytics (IVA), enabling real-time analysis of the surveillance footage. This includes features such as motion detection, intrusion detection, and line crossing alarms. By leveraging these analytical capabilities, users can receive timely alerts and have the ability to react quickly to potential security breaches or suspicious activities.

In terms of installation and integration, the AD2089 supports Power over Ethernet (PoE) technology. This simplifies wiring requirements by allowing power and data to be transmitted through a single Ethernet cable, thereby reducing installation costs and efforts. Additionally, the camera is designed to be weather-resistant, making it suitable for outdoor deployment in various environmental conditions.

Furthermore, the AD2089 is equipped with secure data storage options, supporting both local and cloud-based recordings. This ensures that footage is safely archived and easily retrievable, which is essential for any security operation. With features like remote access through mobile devices and a user-friendly interface, the American Dynamics AD2089 stands out as a reliable and powerful surveillance solution, catering to the diverse needs of modern security systems.