Tektronix manual Phaser 480 Quick Cleaning Procedure, Cleaning sheet reusable

T I P S & H I N T S

Phaser 480 Quick Cleaning Procedure

To improve print quality and eliminate paper jams, your Phaser 480 printer should be thoroughly cleaned every time you replace the transfer roll. The procedure below explains how to clean your Phaser 480 printer. Try this procedure if printing is streaked or media feeds improperly.

If you do not have a cleaning kit, call Tektronix at 1-800-835-6100, and order the Phaser 480 Cleaning Kit, part number: 016-1287-00.

To perform Quick Cleaning you wlll need these items, found in your cleaning kit:

1 Lint-free wipes

90% Isopropyl	3	Cleaning sheet (reusable)
	2	Bottle, filled with 90% isopropyl alcohol

2 3

1		P R
	90%
	ISO	OP

a a b

x	x
	c
x	x

•Remove paper from the paper tray and place on a clean, dust free surface.

•Replace the cover.

•Place the cleaning sheet on the cover of the empty paper tray:

-press the corners of the cleaning sheet under the hooks (a);

-press the flaps into the opening in the tray (b) and under tray cover (c);

•Dampen each of the 4 pads with at least 20 drops of alcohol (x).

4

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9

•Replace the paper tray.

•At the back of the printer, flip Switch 6 up.

•Flip Switch 1 up, then down.

•Wait for the motor noises (motion) to stop.

•Repeat toggle of Switch 1 three more times, waiting each time for motor to stop.

• Flip Switch 6 down.	• Remove the paper tray.
• Toggle Switch 1 up, then down.	• Remove the cleaning sheet.

[Phaser 480 Quick Cleaning Procedure] #8801, 3-14-95