Panasonic M9RZ90GB4LG manual Names and functions, Motor

1. Introduction

2. Installation

Names and functions

Motor Nameplate

Frame

Wiring

nameplate

Earth ground terminal

M4 x 6 stainless steel

with spring and flat washer

Capacitor cap

#187

Quick connect tab (Faston)

Capacitor

Motor accessories (only for single phase version)

*Don't remove the nameplate.

Gear head nameplate
O ring	Oil seal
Bracket
	Key
Oil seal

Output shaft

Shaft

Screw Flat washer Nut

Gear head accessories

Motor

Installation location

Install the motor as described to prolong the motor lifetime in a place where;

(1)is free from rain and direct sunlight.

(2)is free from vibration 4.9 m/s2 or more; shock, dust, iron powder or oil mist; splash of water. oil and grinding fluid; and away from flammable materials, corrosive gas (H2S, SO2, NO2, Cl2, etc.) or flammable gas.

(3)is enough ventilated dry and clean keeping oil, water, dust and heat away.

(4)you can check and clean the motor easily.

(5)is not in a closed environment where the motor temperature may increase. This may result in the motor life shortened.

Environmental condition

Item	Description
Ambient temperature	–10°C to 40°C (no freezing) *1
Ambient humidity	85% RH or below (no dewing)
Storage temperature	–10°C to 60°C (no freezing) *2
Vibration	4.9 m/s2 or below (10 to 60 Hz)
Altitude	Lower than 1000 m.

*1) Measurement taken at a point 5 cm from the motor.

*2) Allowable range for a relatively short period, for example, during transportation.

Installation

The motor can be installed vertically or horizontally but leadwires should be directed downward.

Keep the motor away from oil, water and dust

(1) Don't run the cable in water or oil.
(2) Don't expose the motor to splashing oil or	Motor

water.

Cable

Oil, water

English

Ð 8 Ð Ð 9 Ð