Dymo 420P quick start Inserting the Label Cassette, Printing Your First Label

Inserting the Label Cassette

Your label maker uses DYMO D1 label cassettes.

To insert the label cassette

1	Lift the label cassette cover to open the label
	compartment. See Figure 4.
2	Make sure the tape and ribbon are taut
	across the mouth of the cassette and
	that the tape passes between the label	Ribbon
	guides. See Figure 5.	rewind
		spool
	If necessary, turn the ribbon rewind
	spool clockwise to tighten the ribbon.
3	Insert the cassette and press firmly until	Label
	the cassette clicks into place. See
		guides
	Figure 6.
4	Close the label cassette cover.

Printing Your First Label

The first time you turn on the power, you are asked to select the language and label width. These selections remain set until you change them.

To set up the label maker

1Press Power to turn on the power.

2Select the language and press OK.

Figure 4

Figure 5

Figure 6

3Select the width of the label cassette currently in the label maker and press OK.

3