Troubleshooting
Review the following possible solutions if you encounter a problem while using your label maker.
Problem/Error Message | Solution | |
| • Ensure the label maker is turned on. | |
No display | • Attach the power adapter to recharge the | |
battery pack. See Recharging the | ||
| ||
| Battery Pack. | |
|
| |
| • Attach the power adapter to recharge the | |
| battery pack. See Recharging the | |
Poor Print Quality | Battery Pack. | |
• Clean the print head. | ||
| ||
| • Ensure the label cassette is installed properly. | |
| • Replace the label cassette. | |
|
| |
Poor Cutter Performance | Clean the cutter blade. See Caring for Your | |
| Label Maker. | |
|
| |
Printing... | No action required. | |
Message disappears when printing is finished. | ||
| ||
|
| |
Too many characters |
| |
Exceeded maximum number of | Delete some or all of the buffer text. | |
characters in buffer. |
| |
|
| |
Too many lines | • Delete a line to fit on the label width. | |
Exceeded maximum number | • Insert a wider label cassette. | |
of lines. |
| |
|
| |
Charge Battery! | Attach the power adapter to recharge the | |
Battery pack almost discharged. | battery pack. See Recharging the | |
| Battery Pack. | |
|
|
26