Nortel Networks 302403-B manual Replacing an MDA with a Different Model

Page 21

After connecting the port cables, continue to follow the instructions in that manual to connect power and verify the installation.

Note: The IEEE 802.3u specification requires that all ports operating at 100 Mb/s use only Category 5 unshielded twisted pair (UTP) cabling.

Replacing an MDA with a Different Model

When replacing an installed MDA with another type of MDA, complete the following steps to clear the switch

NVRAM:

1.Power down the switch.

Remove the AC power cord from the power source.

2.Remove the installed MDA.

Loosen the thumbscrews and remove the MDA.

3.Cycle the switch power.

Power up the switch and wait for the Bay Networks logo screen to appear (approximately 10 seconds); then power down the switch.

4.Install the replacement MDA.

Be sure to firmly tighten the two thumbscrews on the MDA front panel.

5.Power up the switch.

19

Page 20 Page 21
Image 21
Page 20 Page 21
Contents Installing Media Dependent Adapters MDAs By Bay Networks, Inc Type Model/Description Refer to Introduction10BASE-T/100BASE-TX MDA 4TX MDA Front Panel 4TX MDA Components Label Description 100BASE-FX MDAs Page Page BASE-FX MDA Front Panels BASE-FX MDA Components Label Description 1000BASE-SX MDAs BASE-SX MDA Front Panels BASE-SX MDA Components Label Description 1000BASE-LX Multimode Applications on 1000BASE-LX MDAsBASE-LX MDA Front Panels BASE-LX MDA Components Label Description 1000BASE-LX Multimode Applications Installing an MDA Installing an MDA Replacing an MDA with a Different Model

302403-B specifications

Nortel Networks 302403-B is a part of Nortel's portfolio that exemplifies its commitment to providing advanced networking solutions tailored for both enterprise and service provider environments. As a leading telecommunications company, Nortel was known for its innovative technology, and the 302403-B is no exception.

The Nortel 302403-B primarily operates as a power supply unit designed to work with Nortel's communication systems, particularly in Voice over Internet Protocol (VoIP) installations. One of its standout features is its ability to supply power to various network devices while ensuring high levels of reliability and efficiency. This attribute is crucial for maintaining uptime in voice and data communications, which are essential in today’s interconnected world.

Technologically, the 302403-B supports Power over Ethernet (PoE) standards, facilitating the transmission of electricity alongside data through network cables. This integration simplifies installations and reduces the need for additional electrical outlets, making it particularly advantageous for businesses that depend on a myriad of IP devices. The ability to power VoIP phones, wireless access points, and IP cameras directly through the Ethernet cable streamlines the networking process and reduces clutter.

One of the primary characteristics of the Nortel 302403-B is its robust build quality, designed to endure the pressures of a corporate environment. This power supply unit often includes features like multiple output options, allowing it to effectively cater to diverse equipment needs. It typically features built-in safeguards against power surges and overloading, ensuring that connected devices are protected from potential damage, which enhances the overall lifespan of the network infrastructure.

Moreover, the Nortel 302403-B is designed for easy integration into existing networks, offering compatibility with a wide range of Nortel devices and third-party equipment. Its user-friendly design includes diagnostic indicators for easy monitoring of status and performance, thereby aiding network maintenance tasks.

In conclusion, the Nortel Networks 302403-B represents a combination of reliability, efficiency, and advanced technology, making it an integral component for organizations that rely on a robust communication infrastructure. Whether used in new installations or as part of an existing network upgrade, it stands as a testament to Nortel's legacy in shaping telecommunications solutions.
Top Page Image Contents