Transcend Information StoreJet 25 (Version 1.3) user manual Connecting to a Computer︱ USB Cable

Page 6

Connecting to a Computer︱

USB Cable

Micro / Mini USB Connector

Power Connector

USB 2.0 / 3.0 Connector

USB3.0 Micro B Type Male

USB3.0 A Type Male

1.Plug the small end (1) of the USB cable into the StoreJet 25.

2.Plug the large end (2) of your USB cable into any available USB2.0 or USB3.0 port on your desktop or notebook (compatibility not guaranteed).

NOTE: Some computers may not be able to provide sufficient power by using only one USB port. If your StoreJet drive does not function well, connect both ends of the USB Y-cable to your computer to ensure the StoreJet drive receives sufficient power.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents
User’s Manual Table of Contents Introduction︱ General Use USB 3.0 Models USB 2.0 ModelsTransporting Connecting to a Computer︱ USB Cable Page Page Select StoreJet models only Disconnecting from a Computer︱ WindowsLinux Formatting the Hard Drive︱ Windows XP/Vista/7/8Page Click the Close button to finish and exit Page Linux Troubleshooting︱ StoreJet 25 does not power onMy operating system cannot detect the StoreJet ’m having problems with the StoreJet 25 on my Mac Cannot copy large files to the StoreJetCannot detect the StoreJet 25 in Linux Page Specifications︱ Recycling & Environmental Considerations︱ Three-year Limited Warranty︱ Limitations