Transcend Information 35 Ultra user manual Linux

Page 13

Linux®

1.Connect the power cable to the Power Adapter and plug it into your home’s power outlet. Then connect the Power Adapter to the StoreJet 35 Ultra’s round-shaped DC power input jack.

2.Plug the square-shaped end of the USB cable into the StoreJet 35 Ultra.

3.Plug the other end of the USB cable into an available USB port on your desktop.

4.Turn on the StoreJet 35 Ultra’s power switch. Its LED will light up and the cooling fan will start.

5.If you installed a brand new hard drive or a hard drive that was previously used with a Windows® or Mac® computer, please follow the instructions in the Formatting the Hard Drive section to prepare your disk for use with your Linux® system.

6.Create a directory for the StoreJet 35 Ultra.

Example: mkdir /mnt/Storejet

7.Then, mount the StoreJet 35 Ultra.

Example: mount –a –t msdos /dev/sda1 /mnt/Storejet

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents StoreJet 35 Ultra User’s Manual Table of Contents Introduction︱ Package Contents︱Features︱ Setup Safety Precautions︱System Requirements︱ General UseReminders PowerProduct Overview︱ Installing a Hard Drive Installing a Hard Drive︱Page Windows 2000/XP Connecting to a Computer︱Windows Vista Mac OS Linux Windows→ 2000, XP and Vista USB Disconnecting from a Computer︱Windows→ 2000, XP and Vista eSATA Page Linux→ Kernel 2.4, or Later USB Mac→ OS USB & eSATAFormatting the Hard Drive︱ Windows Vista Page Click the Close button to finish and exit Page Linux Troubleshooting︱ Page Ordering Information︱ Specifications︱Transcend Information, Inc Transcend Limited Warranty︱
Top Page Image Contents