Installing the SPS-50

The SPS-50 is not weather proof and must be protected from exposure. Ideally, the unit should be located inside the operator, away from where water might infiltrate the operator. If there is no suitable space inside the operator, it may be located in an electrical enclosure outside the operator. The battery pack must be connected to the SPS-50 control box with the leads provided. Do not route low voltage wires in the same conduit as high voltage wires. Follow all local electrical codes or the national electrical code.

The following items are included with the SPS-50:

1.1- SPS-50 control box

2.1- SPS-50 battery pack

3.1- Relay output wire harness

4.2- AC power in or power out wire harness

5.1- Warning label

6.1- Instruction Manual

W A R N I N G !

THE SPS-50 IS DESIGNED TO PROVIDE POWER TO A GATE OPERATOR WHEN THE MAIN AC POWER IS TURNED OFF. A GATE OPERATOR CONNECTED TO THE SPS-50 MAY START UNEXPECTEDLY WHEN THE MAIN AC POWER IS TURNED OFF. WHEN SERVICING THE GATE OPERATOR OF THE SPS-50 DISCONNECT THE BATTERY PACK.

The SPS-50 consists of control box and a battery pack. Connectors are located on the SPS-50 control box for AC IN, AC OUT, RELAY and BAT LO. Pre-wired harnesses are provided to mate with these connectors. The black and red wires are used to connect to the battery pack. The LED’s indicate the status of the main AC voltage and the SPS-50 as follows:

AC ON: Green LED on, AC line voltage present

RELAY: Yellow LED on, relay NO output is closed to common, CM

INV ON: Yellow LED on, the SPS-50 is providing power to the gate operator

LO BAT: Red LED on, the LO BAT relay NO output is closed to common, CM

Refer to the figure below for the location of the connectors and LED’s.

W A R N I N G !

THE SPS-50 PRODUCES LETHAL VOLTAGES.

THE BATTERY PACK IS CAPABLE OF

SUPPLYING HAZARDOUS CURRENT. THE SPS- 50 SHOULD BE INSTALLED BY A QUALIFIED TECHNICIAN.

W A R N I N G !

DANGEROUS VOLTAGES MAY BE PRESENT WHEN THE BATTERY PACK IS CONNECTED TO THE SPS-50 CONTROL BOX. DO NOT CONNECT THE BATTERY UNTIL INSTRUCTED TO DO SO. DISCONNECT THE BATTERY PACK BEFORE SERVICING.

107888

Figure 1: Location of Connectors and LED’s

SPS-50, Gate Operator Standby Power Supply specifications

The Allstar Products Group Gate Operator Standby Power Supply, model SPS-50, is a vital accessory designed to enhance the reliability of gate operators in residential and commercial settings. This standby power supply ensures that your automated gate system remains functional during power outages, offering peace of mind and maintaining the security of your property when it's needed most.

One of the standout features of the SPS-50 is its robust design, which can seamlessly integrate with a variety of gate operators. This compatibility ensures that users can easily enhance their existing systems without the need for extensive modifications. The SPS-50 is equipped with a powerful rechargeable battery that provides sufficient backup power for extended periods, enabling smooth operation of gate systems even in the absence of grid power.

Another key characteristic of the SPS-50 is its user-friendly interface. The unit is designed for easy installation, simplifying the process for homeowners and installers alike. With straightforward connections and clear instructions, users can set it up quickly and efficiently. The power supply also includes an LED indicator that displays battery status, giving users immediate feedback on the health of the system and informing them when maintenance is needed.

The SPS-50 incorporates advanced technologies for optimal performance. It features an intelligent charging system that prevents overcharging and enhances battery longevity. This technology ensures that the unit maintains an ideal charge level, maximizing its lifespan while minimizing the risk of downtime during critical moments. The transfer switch included in the SPS-50 guarantees an automatic transition from AC power to battery power, ensuring uninterrupted functionality.

In terms of specifications, the SPS-50 is designed to power gate operators with varying voltage requirements, making it a versatile choice for different gate models. With a compact size and durable construction, it can be installed in various locations without taking up excessive space.

Overall, the Allstar Products Group Gate Operator Standby Power Supply, SPS-50, is an indispensable component for anyone looking to enhance the reliability of their gate operating systems. With its combination of user-friendly features, intelligent technology, and robust design, it provides a dependable solution for maintaining gate functionality during power interruptions.