Antec HCG-620M user manual

Page 6

4.Connect extra cables from the cable pack to the sockets on the power supply only if needed. If you are going to plug the PCI-E cables into the PSU, they should go into the red sockets. If the red sockets are not being used for PCI-E, then they can be used for any other type of cable supplied in the pack that accompanies the PSU.

5.Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied with your PSU.

6.PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient, making the hardwired connector the preferred choice. More powerful cards use multiple connectors, including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on the PSU can be used as either a 6- or 8-pin connector.

Image 6
Contents HCG-620M Power Supply Elite Power Meets Unrivaled Performance Standards and FeaturesSystem Protection Intelligent Hybrid Cable Management Power OutputPlus Certification Modular Cable JacksCable Quantity Power Connectors Description Installation Page Page Technical Support US & Canada