Antec HCG-400M user manual Installation

Page 5

INSTALLATION:

1.Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your case manual if you are unsure where the power supply should be installed.

2.Connect the 24-pin main power connector to your motherboard. If your motherboard uses a 20-pin connector, detach the 4-pin attachment on the 24-pin connector.

Note: The detachable 4-pin section cannot be used in place of a 4-pin +12V connector.

3.Connect the 8-pin or 4+4-pin connector for the CPU. If your motherboard has an 8-pin socket with a cover on some of the openings, we recommend that you remove the cover and use the 8-pin connector.

Note: Please also refer to your motherboard user’s manual for any special instructions.

Image 5
Contents HCG-400M Power Supply System Protection Elite Power Meets Unrivaled PerformanceStandards and Features Plus Certification Power OutputIntelligent Hybrid Cable Management Modular Cable JacksCable Quantity Power Connectors Description Installation Page Page Technical Support US & Canada