American Power Conversion 750VA, 100VAC user manual Storage, Replacing the Battery Module

Page 12

4: STORAGE, MAINTENANCE, AND TRANSPORTING

Storage

Store the UPS covered and positioned as for proper functioning, in a cool, dry location, with the bat- teries fully charged.

At -15 to +30 °C (+5 to +86 °F), charge the UPS battery every six months.

At +30 to +45 °C (+86 to +113 °F), charge the UPS battery every three months.

Replacing the Battery Module

This UPS has an easy to replace, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and connected equipment on for the follow- ing procedure. See your dealer or contact APC at the web site, www.apc.com for information on re- placement battery modules.

Once the battery is disconnected, the connected equipment is not protected from power outages.

Be careful during the following steps-the battery module is heavy.

Refer to Installing and Connecting the Battery and Attaching the Front Bezel, in this manual.

Reverse the instructions for battery removal.

Be sure to deliver the spent battery to a recycling facility or ship it to APC in the replacement battery packing material.

Disconnecting the Battery for Transport

Always DISCONNECT THE BATTERY before shipping in compliance with U.S. Department of Transportation (DOT) regulations.

The battery may remain in the UPS; it does not have to be removed.

1.Shut down and disconnect any equipment attached to the UPS.

2.Shut down and disconnect the UPS from the power supply.

3.Unplug the battery connector. Refer to Mounting the UPS in a Rack, Steps 1 and 2 in this man- ual.

For shipping instructions and to obtain appropriate packing materials contact APC at the web site, www.apc.com/support/contact.

10

Image 12
Contents APC Smart-UPS Page Introduction UnpackingPositioning the UPS Installing the Rails in the Rack Mounting the UPS in a Rack Connecting Equipment and Power to the UPS UPS. Use only interface kits supplied or approved by APC Operation On Battery Operation User Configurable Items 230V models Replacing the Battery Module Disconnecting the Battery for TransportStorage Troubleshooting 120V models only. Site wiring Utility Voltage Service Contacting APCRegulatory Agency Approvals and Radio Frequency Warnings 230V ModelsDeclaration of Conformity Limited Warranty
Related manuals
Manual 27 pages 38.83 Kb Manual 18 pages 38.85 Kb

100VAC, 750VA specifications

American Power Conversion (APC) has long been renowned for its commitment to providing reliable power protection solutions. One of their well-regarded offerings is the APC 750VA, 100VAC Uninterruptible Power Supply (UPS). This model is designed to safeguard sensitive electronic equipment from power disturbances while ensuring continuous operation during outages.

The APC 750VA, 100VAC UPS is built to accommodate the power requirements of small networks, home office setups, and personal use. With a 750VA power capacity, it provides essential support for a variety of devices, including computers, networking equipment, and peripherals, ensuring that they remain operational during unexpected power interruptions.

One of the standout features of this APC model is its sine wave output. Unlike traditional modified sine wave outputs, sine wave technology delivers a smoother waveform, which is less stressful on connected devices, improving their longevity and performance. The UPS also includes automatic voltage regulation (AVR) that stabilizes voltage levels by correcting minor power fluctuations without switching to battery mode, thereby extending battery life and reducing unnecessary wear.

The unit also boasts several communication options. It features USB and serial ports that allow for easy connection to management software, enabling users to monitor power usage and battery health. The built-in alarm systems similarly notify users of power disturbances or battery failure, providing critical alerts that facilitate timely interventions.

Another notable characteristic of the APC 750VA UPS is its compact form factor, making it easy to position within home or office environments without consuming much space. The design is also user-friendly, featuring a clear LED display that shows battery status, load level, and overall health status at a glance.

In terms of battery characteristics, the UPS uses sealed lead-acid batteries that are user-replaceable, simplifying maintenance and ensuring that the system continues to operate effectively over the years. The battery runtime is adjustable, allowing users to choose between higher performance for critical devices or extended backup time for non-essential devices.

Overall, the APC 750VA, 100VAC UPS is a versatile and robust power protection solution, blending innovative technology with practical design elements to meet the diverse needs of users in a variety of settings. With its reliable performance, advanced features, and user-friendly interface, it has become an essential component for ensuring continuous power availability and protecting valuable electronics.