Introduction
About this Unit
The SUA48RMXLBP3U connects to the APC
Unpack
Read the Safety Guide before installing the unit. The User Manual and Safety Guide are accessible on the supplied User Manuals CD and on the APC Web site, www.apc.com.
Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents:
•External Battery Pack with two battery modules installed
•Bezel
•Rail kit
•External Battery Pack literature kit containing:
–Two brackets
–Eight flathead screws
–Product documentation
–
–Safety information
–Warranty information
The model and serial numbers for all units are located on the rear panel. See the small label with numbers and bar codes.
Specifications
Temperature | 32° to 104° F (0° to 40° C) | This unit is designed for indoor |
Operating | use only. Select a location sturdy | |
Storage | 5° to 113° F | enough to handle the weight. |
| months | Do not operate this unit where |
|
| |
Maximum |
| there is excessive dust or the |
Elevation |
| temperature or humidity are |
Operating | 10,000ft (3,000m) | outside the specified limits. |
Storage | 50,000ft (15,240m) |
|
|
|
|
Humidity | 0 to 95% relative humidity, |
|
|
|
|
Weight | 150 lbs (68 kg) with battery module | 150 lbs (68 kg) |
| 40 lbs (18 kg) without battery module |
|
| 55 lbs (25 kg) each battery module |
|
|
|
|
Maximum Number of External Battery Packs Supported by the | 10 | |
|
| |
|
|
|
SUA48RMXLBP3U External Battery Pack User Manual | 3 |