Connect the Battery, Connect Equipment | APC BE600N-BR instruction

User Guide - Back-UPS®BE600N-BR

This unit is intended for indoor use only.

Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.

Connect the Back-UPS power cord directly to a wall outlet. Do not use a surge protector or an extension cord.

Connect the Battery

The Back-UPS is shipped with one battery cable disconnected. Remove the “Stop! Connect the Battery” label that covers the terminals. Prior to connecting any equipment to the unit, connect the battery cable to the unused battery terminal. Small sparks may occur when the battery cable is connected to the battery terminal.

Press the battery compartment cover

release tab located on the rear side of the unit. Slide the battery cover off.

Connect the battery cable securely to the battery terminal.

Reinstall the battery compartment cover. Be sure that the release tab locks into place.

bu064b

bu114a

Connect Equipment

Battery Back-up + Surge Protection outlets

Outlets provide protection to connected equipment when the Back-UPS is turned ON and connected to utility power.

Outlets receive power from the Back-UPS for a limited period of time when a power outage, or brownout condition occurs.

Outlets provide protection from power surges or spikes.

Connect a computer, monitor and other peripheral devices to the outlets.

bu066b

AVR

Overload

Check Battery

Back-UPS

Battery Back-up + Surge Protection

bu127a

Connect a Computer

If utilizing PowerChute software, connect the supplied data cable to the data port on the rear side of the Back-UPS and to the USB port on the computer.

PowerChute software provides automatic file saving and shutdown of a connected computer during a sustained power outage. PowerChute software is an option that can be purchased along with a data cable through the APC Web site, www.apc.com.

Connect a Modem/Phone/FAX

1.Use a standard telephone cable to connect the Back-UPS Wall Outlet port to a telephone wall jack.

2.Use a standard telephone cable to connect the Back-UPS Modem/Phone/FAX port to a modem or FAX machine.

Data Port

Modem/Phone/

FAX

Wall Outlet

8 A

5 A

bu128a