American Power Conversion 2200VA 3U, 3000VA 3U user manual Battery face plate

3.	Locate the battery module handle at the top of the
	battery face plate •.
4.	Be careful during this step—the battery module is
	heavy.
	Pull the battery module handle toward you to
•	slide the battery module out of the UPS.
	DO NOT pull on the battery cables or the white
	cord.
MOUNTING THE UPS IN THE RACK

Due to its weight, two people are required to install the UPS in the rack.

	1.	Supporting the UPS on both sides, carefully align
		the unit with the rails. Use the handles Πon the
		side of the UPS to support the unit.
	2.	Each side of the UPS has a cleat • that must
Œ		slide into the groove on the rails. Insert each cleat
		into its groove and slide the UPS into position.
•	3.	Use the four ornamental screws supplied with the
		UPS to attach the mounting brackets to the rack

Œ	post. Insert the screws into the top and bottom
	holes in the U-space.

REINSTALLING THE BATTERY MODULE

1.Supporting the battery module on the bottom, align it with the opening and slide the battery module into the compartment.

2.Replace the two screws to secure the battery

module face plate.

6