2:START UP
Connect the Battery
Bottom of unit
Connect black wire to battery. (Red wire is already connected.) Note: Small sparks at the point of battery connection are normal.
Connect Equipment to the UPS
Rear Panels |
|
|
110/120 V: | 230 V: | 230 V models: The top |
|
| vides surge protection only. Equipment |
plugged into this 500 VA outlet should re- quire surge protection, but should not require power during a utility power failure. The lower three outlets provide battery backup protection, as well as protection from surges.
Note: A laser printer draws significantly more power than other types of equipment and may overload the UPS.
2