APC 3000 VA, 1500 VA, SUM3000RMXL2U user manual User Configurable Items

4:USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE MADE THROUGH THE SUPPLIED POWERCHUTE SOFTWARE OR

THE NETWORK INTERFACE CONNECTION. REFER TO THE SOFTWARE HELP GUIDES FOR DETAILS.

FUNCTION	FACTORY	USER SELECTABLE	DESCRIPTION
	DEFAULT	CHOICES
Automatic Self-Test	Every 14 days	Every 14 days	This function sets the interval at which the
	(336 hours)	(336 hours),	UPS will execute a self-test.
		Every 7 days
		(168 hours),
		On Startup Only,
		No Self-Test
UPS ID	UPS_IDEN	Up to eight characters	Use this field to uniquely identify the UPS,
			(i.e. server name or location) for network
			management purposes.
Date of Last Battery	Manufacture Date	mm/dd/yy	Reset this date when you replace the inter-
Replacement			nal battery module.
Minimum Capacity	0 percent	0, 15, 30, 45, 60, 75, 90	The UPS will charge its batteries to the
Before Return from		percent	specified percentage before powering up
Shutdown			connected equipment, following a low-
			battery shutdown.
Voltage Sensitivity	High	High, Medium, Low	The UPS detects and reacts to line voltage
			distortions by transferring to battery power
			to protect the connected equipment. When
			power quality is poor, the UPS may fre-
			quently transfer to battery power. If the
			connected equipment can operate normally
			under such line voltage conditions, reduce
			the sensitivity setting to conserve battery’s
			capacity and service life.
Alarm Control	Enable	Enable, Mute, Disable	User can mute an ongoing alarm or disable
			all existing alarms permanently.
Shutdown Delay	90 seconds	90, 180, 270, 360, 450,	The interval is set between the times when
		540, 630, 0 seconds	the UPS receives a shutdown command and
			when it shuts off power to the outlets.
Low Battery Warning	2 minutes	2, 5, 8, 11, 14, 17, 20,	PowerChute software provides automatic,
		23 minutes	unattended shutdown when the remaining
			battery runtime matches this setting while
			on battery.
			Change the low battery warning interval
			default setting to the time that the operating
			system or system software requires to
			safely shut down.
Synchronized Turn-on	0 seconds	0, 60, 120, 180, 240,	The UPS will wait the specified time after
Delay		300, 360, 420 seconds	the return of utility power before turn-on
			(to avoid branch circuit overload).

8