APC 7000 dimensions Mechanical characteristics

Page 6

Specification guide

Single UPS, three-phase, 160 to 500 kVA (cont.)

initiated transfer shall also be possible.

If the bypass power is outside the specified tolerances or is not synchronized with the inverter, automatic transfer of the load from the inverter to bypass power shall be disabled or shall take place after a calibrated interruption adjustable from 15 to 1000 ms.

5.4.2. Static-switch protection

The static switch shall be equipped with an RC filter for protection against switching over voltages and lightning strikes.

5.4.3. Static-switch withstand

For the specified power rating of …[ 500 / 400 / 300 / 250 / 200 / 160 ]… kVA, the static switch shall be capable of handling an over current of …[ 16 / 16 / 21 / 25 / 18 / 23 ]…. times the rated current of the UPS to facilitate

discrimination within the electrical installation.

5.5. Discrimination and short-circuit capacity

If the bypass power is within the tolerances specified in section 4.2, the presence of the static switch shall make it possible to use the short-circuit power of the bypass source to trip the downstream protection devices of the inverter.

To ensure tripping in a selective manner, the available power shall be sufficient to trip protection devices with high ratings (circuit breaker rated In/2 or UR fuses rated In/4, where In is the rated inverter current).

If the bypass source is outside the specified tolerances, the inverter on its own shall, for the same discrimination requirements, be capable of tripping circuit breakers rated In/2 or UR fuses rated In/4, irrespective of the type of short-circuit.

5.6. System earthing (grounding) arrangements (SEA)

The UPS shall be compatible with the following system earthing arrangements (SEA):

ωUpstream source SEA: …[TT/ IT / TNS / TNC]…

ωDownstream installation SEA: …[ TT/ IT / TNS / TNC ]…

If the upstream and downstream SEAs are different, galvanic isolation shall be provided on the normal and bypass lines.

6. Mechanical characteristics

6.1. Mechanical structure

The UPS and batteries shall be installed in cabinet(s) with an [ IP 20 / IP 32 ] degree of protection (standard IEC 60529). Access to the subassemblies making up the system shall be exclusively through the front.

6.2. Dimensions

The UPS shall require as little floor space as possible. To gain space, it shall be possible to install the UPS with the back to the wall or back to back with another UPS unit.

6.3. Connections

To facilitate connections, all terminal blocks must be easily accessible from the front when the UPS is installed with the back to the wall. Entry of upstream and downstream power cables, as well as any auxiliary cables, shall be possible through the bottom without requiring a false floor.

The UPS shall be equipped with an earth-circuit connector, in compliance with the standards listed in section 12. The cables shall comply with the standards listed in section 12 and be mounted in compliance with the safety stipulations in section 6.6.

6.4. Ventilation

System cooling shall be by forced-air ventilation. To facilitate layout of cabinets (particularly when installed back to the wall), air input shall be through the front and bottom, exit through the top.

All power electronics shall be equipped with a redundant ventilation system including fault detection.

APC by Schneider Electric

Edition - 01/2010

Single UPS spec - p. 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Mechanical characteristics Sizing and general characteristicsElectrical characteristics Battery managementUPS definition Operating principlesSizing and general characteristics Electrical characteristics AC sourcesInverter Automatic bypassMechanical characteristics Environment conditions SafetyUPS not including battery ProtectionBattery management User interface and communicationStatus indications with mimic panel CommunicationControls Standard communicationQuality system and test procedures Standards and testsServices WarrantyFurther services Electrical diagramAppendix. Check list BatteryBattery management and protection Type of UPSEfficiency InverterBypass functions User interfaceOperation, Maintainability CommunicationCertification Availability

7000 specifications

The APC 7000, a renowned product from APC by Schneider Electric, represents a significant advancement in the realm of power conditioning and management. This high-performance uninterruptible power supply (UPS) is engineered to provide reliable and comprehensive protection for critical equipment in various environments, from small businesses to large enterprises.

One of the main features of the APC 7000 is its robust power management capabilities. With an impressive output capacity, this UPS ensures that devices remain powered during outages or fluctuations in voltage. The incorporation of Advanced Battery Management technology maximizes battery life and efficiency, providing users with longer operational time during power disturbances.

The APC 7000 also boasts a user-friendly LCD display, which provides real-time information on the UPS status, including power usage, battery health, and load levels. This intuitive interface allows users to monitor performance at a glance and facilitates easy navigation through the system settings.

In addition to its monitoring capabilities, the APC 7000 integrates SmartSlot technology. This feature enables users to customize the UPS with additional management cards, enhancing its functionality. Users can choose from various options such as network management cards, which allow remote monitoring and control, or environmental monitoring cards that track temperature and humidity levels.

Built with scalability in mind, the APC 7000 supports external battery packs, allowing for increased runtime. This is particularly vital for businesses with extended operational needs during outages. The system also includes intelligent cooling and a heat-sensitive fan, which adjusts its operation based on the load and temperature, thus optimizing performance while reducing noise levels.

Furthermore, the APC 7000 is equipped with multiple output options, including programmable outlets. This feature enables users to manage power distribution efficiently, ensuring essential devices remain operational while less critical equipment can be powered down to conserve battery life.

With its blend of cutting-edge technologies and robust features, the APC 7000 stands out as a reliable powerhouse that meets the demands of modern power protection. Its commitment to performance, user-centric design, and scalability make it an indispensable asset for organizations looking to maintain uptime and safeguard their critical operations. By providing exceptional efficiency and reliable service, the APC 7000 solidifies its position as a leading choice among UPS solutions in today's dynamic technology landscape.
Top Page Image Contents