OWI AMP-IC6, AMP-IC5 installation instructions Limited Warranty

Page 9

Trouble Shooting Guide

1.No output: Disconnect any secondary speakers and check for operation of the primary speaker only. If still there is no output, check for loose screws on the green input connector. It is easy to think the wires are secured in the connector and one wire is not. Tug on each wire to make sure each is tight.

2.Intermittent output: Check for shorted output causing the amplifier to into and output protection. Check each input wire for loose screws.

3.Distortion: Do not power more than one AMPIC5/6 on one power supply. While it will work, it will cause distortion.

4.No output, check to see that the power on light is on. It is located on the main PCB. If it is off, the power supply is either bad or has come loose in the power socket.

5.Hum, for single ended inputs, there is a need for a jumper between – and the ground screw. Most of the time, the jumper is needed.

LIMITED WARRANTY

1.The AMPIC5/6 product has been thoroughly tested and inspected at the factory. It is warranted for one (1) year from date of purchase.

IT IS THE OWNERS’ RESPONSIBILITY TO ESTABLISH THE DATE OF PURCHASE BY ACCEPTABLE EVIDENCE AT TIME SERVICE IS SOUGHT.

2.Any unit, which in the judgment of OWI INC. is defective or develops defects under normal use will be replaced or repaired without cost within the warranty period.

3.This warranty will be considered void if unit has been dropped, misused, abused, altered in any manner, overdriven with excessive amplification exceeding manufacturer’s specification, improperly serviced or accidental damage.

4.OWI Inc. shall have no liability whatsoever for consequential damage. The sole responsibility and discretion of OWI Inc. under this warranty shall be limited to the repair of the product or replacement thereof.

5.IMPORTANT: This warranty is void unless the attached card is completed and mailed to OWI Inc. within 10 days following the date of purchase. Units must be sent to OWI Inc. or to the dealer where purchased.

Page 9 of 16

Filename:AMPIC5_6 MANUAL

 

07/18/08

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Kingsview Ave. Carson CA 90746 USA Models AMPIC5 / AMPIC6Important Safety Instructions Duration Per Day Sound Level dab Typical Introduction Specifications Model NumberPower source Lower Noise Feature, Differential inputWire gauge Low level audio wire runsAmplifier Protection Loud music installations, dance floors etcFilenameAMPIC56 Manual FilenameAMPIC56 Manual Limited Warranty OWI Incorporated FilenameAMPIC56 Manual FilenameAMPIC56 Manual Placement in Ceiling Speaker PlacementPlacement in Wall Mounting your OWI SpeakersPreparing your OWI Speakers for Mounting OWI INC Length Minimum GaugeFilenameAMPIC56 Manual

AMP-IC6, AMP-IC5 specifications

The OWI AMP-IC6 and AMP-IC5 are advanced amplifier platforms designed to deliver exceptional audio performance and versatility for a range of applications. These amplifiers are particularly popular in home audio systems, professional environments, and educational settings due to their robust features and cutting-edge technologies.

The AMP-IC6 is a high-efficiency Class D amplifier, known for its powerful output and compact design. With a power rating of up to 60 watts per channel, it provides ample power to drive both passive and active speakers, making it suitable for various audio setups. One of the standout features of the AMP-IC6 is its ability to operate at high efficiency, resulting in less heat generation compared to traditional amplifiers. This ensures longer operational life and reduced energy consumption, which is increasingly important in today’s eco-conscious environment.

In contrast, the AMP-IC5 offers a slightly lower power output, typically around 50 watts per channel, but shares many of the same technological advancements as the AMP-IC6. Both models employ advanced signal processing technology, enabling superior sound quality with low distortion and excellent dynamic range. This translates to clearer vocals, richer bass, and overall enhanced audio fidelity, appealing to audiophiles and casual listeners alike.

Both amplifiers feature multiple input options, including RCA and balanced inputs, catering to various source devices. They are equipped with adjustable gain controls, allowing users to fine-tune their audio experience. Additionally, these amplifiers incorporate thermal overload protection and short-circuit protection, ensuring safe operation even under demanding conditions.

The compact and lightweight design of the OWI AMP-IC6 and AMP-IC5 amplifiers makes them easy to integrate into any audio system or space, without compromising on performance. Their versatility enables use in diverse settings, from classrooms and conference rooms to home theaters and commercial audio installations.

In summary, the OWI AMP-IC6 and AMP-IC5 are powerhouse amplifiers that blend efficiency, power, and exceptional audio characteristics. Their robust feature set and modern technologies make them ideal choices for anyone seeking reliable and high-quality audio solutions. Whether enhancing a home sound system or providing audio support in a professional environment, these amplifiers deliver performance and versatility that meet the demands of today’s audio consumers.
Top Page Image Contents