Antec EA-350 user manual Output Capacity and Regulation, Installation

TABLE 3: OUTPUT CAPACITY AND REGULATION

Output	Load Max.	Regulation	Ripple & Noise
Voltage
+3.3V	16A	±5%	40mV
+5V	16A	±5%	40mV
+12V1	18A	±5%	80mV
+12V2	18A	±5%	80mV
–12V	0.3A	±10%	120mV
+5Vsb	2.5A	±5%	40mV

The continuous maximum total output power shall not exceed 350W.

+12V1 and +12V2 DC maximum output power shall not exceed 330W.

+3.3V and +5V DC maximum combined output power shall not exceed 105W.

INSTALLATION:

1. Install the EA-350 Green PSU into your case with the four screws provided.

2.Connect the 24-pin main power connector to your motherboard. If your motherboard uses a 20-pin connector, detach the 4-pin attachment on the 24-pin connector.

Note: The detachable 4-pin section cannot be used in place of a 4-pin +12V connector.