7.Connect the 24-pin Main Power Connector (Illustration 2). If the mother- board uses a 20-pin connector, detach the 4-pin attachment on the 24-pin power connector (see pictures 1 and 2).
Note: the detachable 4-pin section cannot be used | Picture 1 | Picture 2 |
in place of a 4-pin +12V connector. | | |
d | |
For 24-pin | For 20-pin |
motherboards | motherboards |
8.Connect the 4-pin (Illustration 3) 12V connector to the motherboard as needed.
9.If your video card requires a PCI-E Connector, then connect the cable from the main wire bundle to your video card.
10.Connect the Drives and Accessories Cable to devices such as hard drives, optical drives, fans, etc.
11.Connect the SATA cable if you are using a Serial ATA hard drives.
12.Close your computer case.