Advanced Cable Management Wire Set.
4.One Y-adapter with one standard 4-pin Molex peripheral connector at one end and two female Floppy power connectors at the other end.
5.One set of wires with a 6-pin PCI Express graphic card connector at one end and a 6-pin PSU connector at the other end.
6.Two sets of wires with three standard 4-pin Molex peripheral connectors at one end and a 6-pin PSU connector at the other end.
7.Two sets of wires with two SATA drive connectors at one end and a 6-pin PSU connector at the other end. Note: The SATA connectors include a +3.3V output so you can power the latest SATA devices.
Modularized Cables:
| # | Quantity | Part Name | Description |
| | | | |
| 4 | 1 | 14 cm Molex to Floppy connectors | includes one Molex and two floppy |
| w/cable | connectors |
| | | | |
| 5 | 1 | 60 cm PCI Express connector | Includes one PCI Express connector |
| w/cable |
| |
| | | | |
| 6 | 2 | 77 cm Molex connector w/cable | includes three Molex connectors |
| | | | |
| 7 | 2 | 73 cm Serial ATA connector w/cable | includes two Serial ATA connectors |
| | | | |
This power supply is backwards-compatible to previous ATX specifications. To make sure you connect your power supply properly, please refer to the user manual supplied with your motherboard and peripherals before connecting the Neo HE to any of your devices.
1.Connect the 24-pin main power connector. If your motherboard uses a 20-pin connector, detach the 4-pin attachment on the 24-pin power connector (see pictures 2
and 3). Note: the detachable 4-pin section cannot be | | |
used in place of the 4-pin +12V connector. | Picture 2 | Picture 3 |
2. Connect the 4-pin +12V connector to the motherboard. |
3.In the package, you will find 2 sets of power supply-to-peripheral Molex connectors. Connect the 6-pin connector to any of the 6 pin sockets on the power supply and connect the peripheral Molex connectors to your peripheral devices. Repeat as necessary.
4.In the package, you'll find 2 sets of power supply-to-SATA connectors. Connect the 6-pin connector to any of the 6-pin sockets on the power supply and connect a SATA connector to your SATA drives. Repeat as necessary.
5.In the package, you'll find one PCI Express graphic card connector. It's the only 6-pin connector with 3 yellow wires and 3 black ones. Connect the 6-pin connector to any of the 6-pin sockets on the power supply and connect the 6-pin PCI Express connector marked "PCI-E" to your PCI Express graphic card if needed. Note: Please consult the user manual supplied with your PCI Express graphic card for detailed usage instructions.
6.If you have a floppy drive, connect the Y-adapter to any of the Molex connectors and connect the female floppy power connector to your floppy drive.
7.Connect the power cord to the power supply.
