5.Note (NOT applicable to models designed for the European Union): Before you install your new power supply, check the red power supply voltage switch setting. It should match your local power voltage (115V for North America, Japan, etc., 230V for Europe, South East Asia, and many other countries). Change the voltage setting if necessary. If you use the wrong voltage setting, you could damage your system and void your warranty.
6. Connect the | Picture 1 |
| Picture 2 |
| |||
|
|
| |
motherboard as needed. If your motherboard uses a |
|
|
|
|
|
| |
the |
|
|
|
Connect the peripheral power connectors to devices |
|
|
|
such as hard drives, optical drives, etc. |
|
|
|
For |
| For | |
7. Connect the Serial ATA connectors if you are using |
| ||
Serial ATA hard drives. | motherboards |
| motherboards |
8.Connect the PCI Express power connector to your PCI Express graphic card as needed.
9.You can connect up to three fans to the dedicated "Fan Only" connectors. Note: Do not connect devices other than fans to these connectors. If you prefer not to let the
10.Optional: If you'd like to monitor the speed if the power supply fan, connect the
signal connector to one of the fan connectors on your motherboard. Note: You don't need to connect the fan signal connector in order for the power supply to work.
11.Close your computer case and connect the AC power cord to the power supply.
Product Specifications
For detailed specifications, please visit our website at http://www.antec.com
3