Allied Telesis AT-PWR3202 warranty Overview, Verifying Package Contents

2. On the back of the AT-RPS3204 unit, locate the power switch that

corresponds to the slot where you are going to install the power supply and

verify that the On/Off button is in the Off (out) position. From left to right on

the back, the power supplies are identified as B2, B1, A2, A1. (An AT-

5. Use a Phillips head screwdriver to tighten the captive screws.

AT-PWR3202 Power Supply Installation Guide

Overview

AT-PWR3202 Power Supply is designed to be installed in an AT-RPS3204 Redundant Power Supply (RPS). The RPS can supply power to Allied Telesis switches if the switch’s main power supply fails.

RPS3204 is shipped with one AT-PWR3202 in the slot marked A1.)

3. Using a Phillips head screwdriver, remove the cover from the slot in the front

of the AT-RPS3204 unit where you want to install the power supply.

Note

As an example, the following steps show an AT-PWR3202 unit installed in slot A2 of the AT-RPS3204 Redundant Power Supply.

STATUS

STATUS

	AT-
	12V	PWR3202
		DC	,16.6A
POWER				MAX
FAULT

STATUS

	AT-
	PW		R3202
	12VDC
POWER		,16.6A		MAX
FAULT

895

AT-PW		R3202
12VDC
POWER	,16.6A		MAX
F
AULT

6.On the back of the AT-RPS3204 unit, plug one end of the 21-pin D-combo connector cable into the connector that corresponds to the slot in which you installed the AT-RPS3202 Power Supply.

STATUS

	AT-PW		R3202
	12VDC
POWER		,16.6A		MAX
FAULT

892

Verifying Package Contents

Verify that the correct components are included in your package:

893

Keep the slot cover in a safe area in case you remove a power supply. The slot cover helps maintain proper air flow through the RPS.

4. Slide the AT-PWR3202 Power Supply into the slot

STATUS

AT-PW		R
12VDC
		3202
POWER	,16.6A		MAX
FAULT

ON

OFF

A2

OU
TPUT	A2
12VDC

AC
INPUT			A2/A1
100	- 240
		VAC ~

RPS
O
UTPUT	A1
12VDC

7.Tighten the captive screws.

A1	ON
	OFF
198

•AT-PWR3202 Power Supply

•One 21-pin D-combo connector cable

•This installation guide

If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

Warranty

The AT-PWR3202 Power Supply has a Lifetime Year Warranty (Five Years Power Supply and Fan). For detailed warranty information, see the www.alliedtelesis.com website.

Installing the Power Supply

To install an AT-PWR3202 Power Supply, perform the following procedure:

1.Remove the AT-PWR3202 unit from its shipping package and store the package in a safe place. You must use the original package if you need to return the power supply to Allied Telesis.

*613-000397 Rev B*

894

STATUS

	AT-PW		R3202
	12VDC
POWER		,16.6A		MAX
FAULT

ON OFF

A2

RPS	OUTPUT
		A2
	12VDC

AC
INPUT				A2/A1
100	-	240
			VAC ~

RPS	OUTPUT
		A1
	12VDC

A1	ON
	OFF
199

PN 613-000397 Rev. B 1 2 3