Phase Technology RS800i Included Accessories, Optional Accessory, SoundTube Entertainment

Page 4

RS800i

Open-Ceiling Speaker

Technical Information for System Engineers

Mechanical Drawings

437.7 mm (17.23 in)

376.5 mm (14.82 in)

Included Accessories

Hanging Hardware: Main & Safety

Cables w/ SpeedClamp™

SoundTube’s hanging cable kit incorpo- rates hanging & safety cables & fasten- ers for an integrated and easy-to-install system. All cables are infinitely adjust- able up to 2.74 M (9.0 ft).

Optional Accessory

551.43 mm (21.71 in)

424.18mm (16.70 in)

Surface-Mount Bracket (AC-RS-SM8)

able frequency response shall extend from

48 Hz – 22 kHz (-10 dB, half space, no exter- nal equalization). Measured sensitivity (2.83 Volt input, 1 meter) shall be at least 92.5 dB. The speaker shall have a nominal imped- ance of 8 Ohms and be available for 25,

70.7& 100 Volt modes with voice coil/8 Ohm direct. The frequency-dividing net- work shall have a crossover frequency of 3 kHz with slopes of 12 dB per octave (2nd order) for both low & high pass filters. Rated power capacity shall be at least 125 Watts continuous power (RMS) and conform to EIA-426-B testing. Maximum continuous output at 1 meter shall be 112.5 dB.

The low-frequency transducer shall have a polypropylene cone with butyl rubber sur- round. The high-frequency transducer shall be constructed of aluminum with a propri- etary BroadBeam11® waveguide.

Installation for the RS800i shall be by

aircraft cable affixed to the speaker chassis via a carabiner. For seismic & safety redun- dancy, a secondary aircraft cable shall be included and attach to the speaker chassis via #10 bolt. The external wiring input con- nector shall be a 4-pin, 5 mm Euroblock for 8 Ohm or distributed systems and shall accept from 10 – 22 gauge wire. The system shall be for indoor & outdoor applications and shall have a weather-resistant terminal boot covering all wire connectors.

The enclosure shall be constructed of injection-molded, mineral-filled, glass-rein- forced ABS. The grille shall be constructed of iridite-plated, powder-coated steel for lasting performance in the elements. Overall cabi- net dimensions shall be no more than 437.7

mm(17.23 in) in height by 376.5 mm (14.82 in) in diameter. The RS800i shall include hanging hardware, Euroblock connector and weather-resistant terminal boot.

The system shall be the SoundTube RS800i with hanging hardware for both low & high impedance applications.

SoundTube Entertainment

6430 North Business Park Loop Park City, Utah 84098

Phone 435.647.9555

Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com

All SoundTube products come with a 5-year limited warranty.

SoundTube Entertainment manufactures a complete line of speakers for:

Open-CeilingIn-CeilingSurface-Mount • Outdoor • Sound-Focusing

All SoundTube products are designed and engineered in the USA.

Image 4
Contents Key Features DescriptionPhase/Impedance Reponse Technical Data Specification Tools Architectural SpecificationsApplications BroadBeam11 Wide Dispersion TechnologyOptional Accessory Included AccessoriesSoundTube Entertainment

RS800i specifications

The Phase Technology RS800i is a premium in-wall speaker designed for discerning audiophiles seeking exceptional sound quality and aesthetics. Built to harmoniously blend into modern living spaces while delivering superior audio performance, the RS800i reflects Phase Technology's commitment to innovation and excellence in sound reproduction.

One of the standout features of the RS800i is its advanced driver technology. The speaker utilizes a high-performance 8-inch polyglass woofer, which is engineered to provide deep, impactful bass response while minimizing distortion. This large driver is complemented by a 1-inch aluminum dome tweeter that delivers crisp, clear highs, ensuring a balanced sound profile that can satisfy a variety of listening preferences. Together, these components provide a dynamic range that caters to everything from classical music to modern pop.

A key characteristic of the RS800i is its adaptability within various audio setups. It features a two-way design that allows for both stereo and multi-channel configurations, making it a versatile option for home theater applications. Additionally, the speaker includes a proprietary, low-diffraction, paintable grille, which not only enhances the aesthetic appeal but also minimizes sound diffraction to preserve audio fidelity.

In terms of installation, the RS800i is designed with user convenience in mind. It comes equipped with an easy-to-use mounting system that accommodates different wall types, ensuring a secure fit and simple installation process. For users concerned with their decor, the speaker can be painted to match the wall, allowing for a seamless integration into any room.

The build quality of the RS800i is another noteworthy feature. It is constructed with a durable cabinet that helps to reduce unwanted vibrations, contributing to cleaner sound reproduction. The materials used in its construction are chosen not just for their aesthetic qualities but also for their acoustic properties, ensuring the speaker performs well over time.

Overall, the Phase Technology RS800i represents a fusion of advanced audio engineering and sleek design, making it an ideal choice for anyone looking to enhance their home audio experience while maintaining an elegant interior. Whether used in dedicated listening rooms or as part of a comprehensive home theater, the RS800i delivers robust sound performance and versatile configuration options, establishing it as a standout choice in the in-wall speaker market.