Phase Technology RS4-EZ specifications Architectural Specifications, SoundTube Entertainment

Page 3

RS4-EZ

Open-Celling Speaker

Technical Information for System Engineers

Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, development and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software. EASEdata are acquired through an automated TEF 20/Outline/EASEinterface.

EASE™ Data 3-D polar plots.

SoundTubeSPEC™ – Proprietary SoundTube speaker placement software.

Architectural Specifications

The loudspeaker shall consist of a 101 mm (4 in) full range driver.

Performance specifications of a typical production unit shall be as fol- lows: Useable frequency response shall extend from 69 Hz – 22 kHz (-10 dB, half space, no external equalization). Measured sensitivity (2.83 Volt input, 1 meter) shall be at least 91.5 dB. The speaker shall have a nominal imped- ance of 8 Ohms and be available for 25,

70.7& 100 Volt modes with voice coil/8 Ohm direct. Rated power capacity shall be at least 20 Watts continuous power (RMS) and conform to EIA-426-B

testing. Maximum continuous output at 1 meter shall be 104.5 dB.

The transducer shall have a treated fiber cone with a treated cloth surround and mated to an ABS baffle.

Installation and safety attachment for the RS4-EZ shall be by aircraft cable affixed to the speaker chassis via an integrated forged aluminum clasp with safety gate. The external wiring input connector shall be a 4-pin, 5 mm Euro- block for 8 Ohm or distributed systems and shall accept from 10 – 22 gauge wire. The system shall be for indoor & outdoor applications and shall have a weather-resistant terminal boot cover- ing all wire connectors.

The enclosure shall be constructed of injection-molded ABS. The grille shall be constructed of iridite-plated, powder- coated steel for lasting performance in the elements. Overall cabinet dimen- sions shall be no more than 197 mm (7.7 in) in height by 224 mm (8.8 in) in diam- eter. The RS4-EZ shall weigh no more than 1.8 kG (3.9 lbs) and shall include hanging hardware, Euroblock connector and weather-resistant terminal boot.

The system shall be the SoundTube RS4-EZ with hanging hardware for both low and high impedance applications.

SoundTube Entertainment

6430 North Business Park Loop Park City, Utah 84098

Phone 435.647.9555

Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com

All SoundTube products come with a 5-year limited warranty.

Polar Plots

125 Hz

250 Hz

500 Hz

1,000 Hz

2,000 Hz

4,000 Hz

8,000 Hz

10,000 Hz

Technical data, EASEplots, SoundTubeSPECsoftware & product downloads available at www.soundtube.com

Image 3
Contents Key Features DescriptionApplications Patented SoundTube Technologies Technical Data Specification ToolsSoundTube Entertainment Architectural SpecificationsOpen-Ceiling In-Ceiling Surface-Mount Outdoor Sound-Focusing Included Accessories

RS4-EZ specifications

Phase Technology RS4-EZ is a versatile and innovative loudspeaker that has garnered attention for its exceptional audio performance and advanced technologies. Designed for both home theater and music applications, the RS4-EZ promises to deliver an immersive listening experience that meets the demands of audiophiles and casual listeners alike.

One of the standout features of the RS4-EZ is its advanced coaxial driver design. The speaker integrates a 4-inch woofer and a 1-inch silk dome tweeter into a single unit, allowing for a uniform dispersion of sound across the frequency spectrum. This design not only improves the overall sound quality but also enhances the speaker's ability to create a realistic three-dimensional soundstage.

Another significant characteristic of the RS4-EZ is its high sensitivity rating, which means that it can produce loud and clear sound without requiring excessive power. This makes it an excellent choice for those looking to maximize their audio setup without needing a high-powered amplifier. Additionally, the speaker is equipped with a precision-engineered crossover that ensures seamless transitions between low, mid, and high frequencies, resulting in a well-balanced sound profile.

The RS4-EZ also boasts a robust cabinet construction, utilizing high-quality materials to minimize distortion and resonance. The speaker cabinet features a rear-firing port, which aids in enhancing the bass response, allowing users to enjoy deep and impactful low frequencies without sacrificing clarity in the mid and high ranges.

In terms of aesthetics, the RS4-EZ is designed to complement modern home decor. It is available in various finishes, allowing users to select a style that best suits their space. The speaker's compact design makes it easy to integrate into any home audio setup, whether mounted on a wall or placed on a shelf.

Furthermore, the Phase Technology RS4-EZ supports various connectivity options, including standard speaker wire connections, making it compatible with a wide range of audio components. Its versatile performance and adaptability ensure that it can meet the demands of various listening environments, from small rooms to larger spaces.

In conclusion, the Phase Technology RS4-EZ stands out for its innovative features, including a coaxial driver design, high sensitivity, and robust construction. Its ability to deliver balanced and immersive sound makes it an excellent choice for audiophiles and casual listeners looking to enhance their audio experience. With its sleek design and versatile connectivity options, the RS4-EZ is truly a remarkable addition to any audio setup.