Step 3 Select the Default profile and click Modify.
Step 4 Enter the SSID (Network Name) that your wireless router/access point is using in the SSID field and click OK.
Step 5 Return to the Current Status tab and verify that you have signal strength and valid IP address.
If your wireless router/access point has encryption enabled, you’ll need to apply the same encryption settings to the Adapter as well. For information on how to configure encryption, please refer to the User’s Manual in the supplied Installation CD.
Section 3
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Web Site: www.airlink101.com
*Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications.Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, mix of wireless products used, radio frequency interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual data throughput rate.
Copyright © 2005 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights.