Overview, Package Contents | Allied Telesis AT-MCF2000AC instruction

AT-MCF2000AC Power Supply Module

Installation Guide

Allied Telesis, Inc.

www.alliedtelesis.com

Overview

The AT-MCF2000AC module is an AC power supply unit for the AT-MCF2000 series of media converter chassis.

STATUS	PSU
NORMAL
FAULT
	FAN

1110-a

Figure 1. AT-MCF2000AC Power Supply Module

Note

For a list of available chassis models in the AT-MCF2000 media converter product line, contact your Allied Telesis sales representative or visit our web site.

613-000575 RevA

Review the following before you begin to install the module in the chassis:

❑Refer to the chassis’ Installation Guide to verify that the module is appropriate for the unit.

❑For instructions on how to remove a power supply module, refer to the chassis’s Installation Guide.

❑The AT-MCF2000AC power supply module is hot-swappable. You can install or replace the module while the chassis is powered on.

❑Refer to the chassis’ Installation Guide for a list of safety precautions to observe when installing the power supply module in the unit.

❑The following procedure uses the AT-MCF2000 media converter chassis for illustration purposes. Your chassis may be different.

Package Contents

Make sure the following items are included in the shipping package. If an item is missing or damaged, contact your Allied Telesis sales representative for assistance.

❑One AT-MCF2000AC power supply module

❑Four regional AC power cords

❑One power cord retaining clip

❑This Installation Guide

Installing the AT-MCF2000AC Power Supply Module

To install the AT-MCF2000AC power supply module, perform the following procedure:

1.Remove the power supply module from the shipping package. Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.

2.Remove a blank panel from a power supply/fan module slot on the back panel of the chassis by loosening the two captive screws of the panel with a cross-head screwdriver. Refer to the chassis’ Installation Guide for the location of the power supply/fan module slots.

AT-		A
MCF2KPN	L2	AT-
		MCF2KPNL3	MA
			MA
		1111-a

Figure 2. Removing the Blank Panel from a Power Supply/Fan Module Slot

3.Slide the power supply module into the slot as shown in Figure 3, until it is flush with the back panel of the chassis. Light pressure may be needed to seat the module on the connector on the back panel of the chassis.

Caution

Do not force the module into place. Doing so may damage the connector pins on the backplane inside the chassis.

	AT-	M
		ANAG
		MCF2KPNL3
STATUS	PSU
NORM	PSU
FAULTAL
	FAN
		1111-a

Figure 3. Installing the AT-MCF2000AC Power Supply Module

4.Secure the power supply module to the chassis by tightening the two captive screws using a cross-head screwdriver. Refer to Figure 4.

STATUS		PSU
NO	RMAL
FAULT
		FAN

AT-
MCF2KPNL3	M
	M

1113-a

Figure 4. Securing the Power Supply Module

5.Locate the retaining brackets on either side of the AC power connector. Refer to Figure 5.

STA	PSU
TUS	PSU
NORMAL
FAULT
	FAN

AT-
MCF2KPNL3	M
	M

Retaining Clip Brackets

Figure 5. Locating the Retaining Clip Brackets

613-000575 Rev A

AT-MCF2000AC specifications

The Allied Telesis AT-MCF2000AC is a robust and versatile managed gigabit fiber switch designed for use in enterprise networks, data centers, and telecommunications applications. It is engineered to provide high-performance connectivity, ensuring that organizations can effectively manage their network traffic and maintain peak operational efficiency.

One of the key features of the AT-MCF2000AC is its support for both copper and fiber optic connections. It provides a variety of port options, including 10/100/1000Base-T and SFP slot configurations, allowing for greater flexibility in connecting various devices across the network. This adaptability makes it an ideal choice for businesses looking to expand their infrastructure without being constrained by fixed connection types.

The switch is equipped with advanced Layer 2 and Layer 3 switching capabilities, enabling effective routing and management of smart traffic. It supports VLAN tagging for network segmentation, security, and improved performance, allowing administrators to optimize bandwidth usage and enhance overall network security. The AT-MCF2000AC includes multiple Quality of Service (QoS) policies, which prioritize essential data and applications, ensuring optimal performance for critical business operations.

A highlight of the AT-MCF2000AC is its energy-efficient design. It complies with Energy Star standards, promoting environmentally friendly practices in data centers and IT operations. This energy efficiency not only reduces operational costs but also contributes to a greener technology footprint.

Additionally, the AT-MCF2000AC is packed with robust security features. It supports various authentication methods, including 802.1X, ensuring that only authorized devices can access the network. The switch also offers port security functions that protect against unauthorized access by limiting connection attempts and tracking MAC addresses.

Management and monitoring are straightforward with the AT-MCF2000AC. It features a user-friendly web interface, SNMP support, and CLI options for network administrators to easily configure and oversee the performance of the switch. Event logging and diagnostic tools aid in troubleshooting potential issues, ensuring minimal downtime.

The AT-MCF2000AC is compatible with Allied Telesis' comprehensive network management software, allowing for centralized management of switches and other devices within the network. It serves as a valuable component in building scalable, high-performance, and secure networks suited for modern enterprise needs. Through its combination of advanced features, reliable performance, and efficient design, the Allied Telesis AT-MCF2000AC enhances network infrastructure while supporting the growing demands of businesses today.