Royal Sovereign RSL-2702S, RSL-382S service manual Opened safety cover, Opened Front Table Switch

Page 8

3. Opened safety cover.

a. Close the safety cover and double check to insure that the safety cover switch is engaged.

Note: By closing the safety cover, it engages the safety cover switch.

Switch is engaged

4.Opened Front Table Switch.

a. Properly position the front table to engage the switch.

5.Film is jammed on the rollers.

a.Un-jam the film using a combination of the pressure lever and reverse button.

6.Disconnected motor wire.

a.Check the motor wire connection with PCB.

Wire-motor

Image 8

Contents MODELRSL-2702S/RSL-382S Wire Diagram Safety PrecautionsAdjustments Safety Precautions Troubleshooting Improper laminating modeMulti-meter Rollers Over Heating No power to the unit Rollers Not RunningOpened safety cover Opened Front Table SwitchNo Main Power No ElectricityTransformer is defective a. Replace the transformer Poor Lamination Quality Replacing the Right Cover Replacing the Left CoverReplacing Rear Cover Replacing the Main PCBReplacing the Sub-PCB Replacing the HeatersReplacing the Cross Cutter Adjusting Take-up Shaft Speed Adjusting front and rear rollers Pressure3mil & 5mil films Part list RSL-2702S Part list Part Name RemarkRSL-2702S SUPPORT-PCB RSL-382S Part list Part Name Remark RSL-382S 109 033LR4002A WASHER-BI Metal Explode View RSL-2702S Expolde View Frame L Frame R Frame, Roller and Other View Wire, Film Shaft,Assy-Auto RSL-382S Expolde View 363LP4013A Frame R FRAME-SENSOR Wire, Front Table, Film Shaft RSL-2702S,RSL-382S Wire Diagram ③ ② ① Connect partSUB PCB and Frame-R Heater Layout Micro Switch and Frame-L Heater Layout

RSL-2702S, RSL-382S specifications

The Royal Sovereign RSL-382S and RSL-2702S are two premium laminating machines designed to meet the needs of both small businesses and home offices. These models are celebrated for their efficient performance, user-friendly operation, and reliable results.

The RSL-382S features a 38-inch width capability, allowing users to laminate larger documents with ease, making it ideal for signage, photographs, and other oversized materials. With a quick warm-up time of approximately 5-10 minutes, it offers exceptional convenience for users who need to complete projects swiftly. The machine is equipped with a temperature control system that supports both thermal and cold laminating processes. This versatility caters to a wide range of materials, ensuring that users achieve the desired finish regardless of the type of project.

The RSL-2702S is a compact yet powerful machine, designed for efficiency in smaller workspaces. This model supports a maximum lamination width of 27 inches, making it suitable for a variety of documents, including reports, presentations, and posters. With a similar warm-up time as the RSL-382S, the RSL-2702S features easy-to-use digital controls that enable precise temperature adjustments and speed settings, catering to different types of laminating films.

Both models incorporate advanced infrared heating technology, which distributes heat uniformly across the rollers, minimizing the risk of wrinkles or bubbles in the final laminate. The construction of these laminators is robust, with built-in safety features that prevent overheating, ensuring the longevity of the machines.

In terms of usability, both models boast adjustable speed settings, allowing users to laminate at their preferred pace. This flexibility is important for achieving optimal results, especially on thicker materials or multiple layers.

For businesses and individuals seeking reliable laminating solutions, the Royal Sovereign RSL-382S and RSL-2702S stand out as exceptional choices. Their combination of large lamination capacities, advanced technologies, and user-friendly features ensures consistent, high-quality results for any laminating task, making them trusted partners in document preservation and presentation enhancement.