Fellowes Venus 125 manual Capabilities, Cursor KEY, Important Safety Information

ENGLISH

Opening lid to clean laminating mechanism

Discrete carry

HeatGuard Technology™ double-walled insulation keeps heat inside

LCD Interface for user guidance

Ready Screen	Forward Rolling Animation
COLD 80 mic 100 mic 125 mic 175 mic ??? EXIT	COLD 80 mic 100 mic 125 mic 175 mic ??? EXIT

handles at side		Support Shelf on entry to
Active Cooling System		guide Laminate path
	Temperature controlled
	release trigger for lid

Ready Screen

COLD 80 mic 100 mic 125 mic 175 mic ??? EXIT

Forward Rolling Animation

COLD 80 mic 100 mic 125 mic 175 mic ??? EXIT

11hour

CAPABILITIES

Pouch Thickness	3-10 mil
Estimated Heat-Up Time	4 Minutes
Approximate Cool-Down Time	60 Minutes
Lamination Speed	18”/Minute
Maximum Width	12.5”
Voltage	120V
Frequency	50/60 Hz

Laminating capacity – 3 to 10 mil hot laminating pouches per side

1000 Watt

Dimensions: 4 3/4” (w) x 21 7/8” (d) x 9 5/8” (h)

Max document thickness 1/32”

Warming Up Progress Bar	Ready Screen
COLD 80 mic 100 mic 125 mic 175 mic ??? EXIT	COLD 80 mic 100 mic 125 mic 175 mic ??? EXIT
120 C

Forward Rolling Animation

COLD 80 mic 100 mic 125 mic 175 mic ??? EXIT

CURSOR KEY

Move Highlight 1 position up

IMPORTANT SAFETY INSTRUCTIONS — Please Read Before Using!

Select the highlighted element on the screen.

Decrease number Increase number

•The socket-outlet shall be installed near the equipment and shall be easily accessible.

•To prevent electrical shock, do NOT use laminator close to water and do NOT spill water on laminator, electric cord, or wall socket.

•Do not leave electric cord in contact with a warm surface.

•Do not leave electric cord hanging from a cupboard or shelf.

•Do not use laminator if electric cord is damaged.

•Do not laminate metal objects.

•Only use pouches specifically designed for the lamination setting you intend to use.

•Always supervise children during laminator operation.

•Keep pets away from laminator while in use.

•Switch off and unplug laminator when not in use.

•Only open the laminator as explained under “Maintenance”. Do not open or attempt to repair in any other way, as this could result in electric shock and will void your warranty. Contact Customer Service if you have questions. Please note the warranty does not apply in cases of abuse, mishandling or unauthorized repair.

Return to the Main

Menu when animation

is complete.

Open Cover Animation

Move Highlight 1 position down

IMPORTANT SAFETY INFORMATION

This laminator is equipped with an Auto shut- off function. It will turn the laminator into stand-by mode, if it has not been used for over 60 minutes. The LCD screen will show the sleep screen when in stand-by.

2

COLD

80 mic	125 mic
100 mic	175 mic

?? HELP? TEMP

To switch the laminator back on, simply press the stand-by button at the left of the front operating panel.

During lamination, the direction of the pouch can be reversed, if you are unsure about the progress of the lamination. To do so, press down the reverse key.

This will eject the pouch back at the front entry.

Go to

Main Menu

Save

system settings.

7

402103.venus.110606_3L.PS.indd Sec1:2-Sec7:7

11/28/06 10:03:10 AM