Applications

RS600i	Open-Ceiling Speaker
	Technical Information for System Engineers

Designed for indoor & outdoor back- ground to mid-level SPL applications, the RS600i includes a single-point mounting system for rapid open-ceiling installations with an optional SM6 bracket for surface-mount applications. The broad dispersion pattern (45 Hz –

10 kHz, EASE™ documented) and high sensitivity (90.5 dB 1W/1M) make the RS600i speaker ideal for retail, restau- rants, grocery stores, hotels, casinos, fitness centers, conference rooms, big box stores, museums, trade shows & airports and other open-ceiling applica- tions. For applications where additional bass is required, SoundTube’s RS801i 8” subwoofer provides bass down to 40 Hz.

BroadBeam® Wide

Dispersion Technology

More than 3 years in development, SoundTube’s proprietary BroadBeam® technology incorporates a high-fre- quency waveguide mated to a 1” convex aluminum tweeter. The BroadBeam® high-frequency waveguide delivers a consistent dispersion pattern across the upper registers of the frequency

spectrum (up to 10 kHz, EASE™ docu- mented). The result is an audio system with fewer speakers, reduced power needs, shorter installation time and cost savings on shipping & labor.

Patented SoundTube

Technologies

SoundTube Entertainment is con- stantly developing new technologies that enhance audio product perfor- mance. SoundTube Entertainment inno- vations are protected by multiple U.S.

&international patents, which explic- itly cover SoundTube dispersion, enclo- sure & dome technologies. SoundTube Entertainment actively defends its pat- ents in order to protect SoundTube resellers and end users.

Technical Data and

Specification Tools

Technical Data

SoundTube Entertainment strives to provide complete and effective technical information and data to dealers, engi- neers and designers. All data are avail- able from SoundTube Entertainment or at www.soundtube.com.

Data Acquisition

All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using a variety of standard measurement tech- niques, including Measured Length Sequence (MLS) and Time Delay Spec- trometry (TDS). Performance, develop- ment and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software. EASE™ data are acquired through an automated TEF 20/Outline/EASE™ inter- face.

EASE™ Data – 3-D polar plots.

SoundTubeSPEC™ – Proprietary SoundTube speaker placement software.

Architectural Specifications

The loudspeaker shall consist of a 165

mm(6.5 in) low-frequency transducer and a 25 mm (1.0 in) high-frequency transducer with a crossover network installed in the ported enclosure. The low-frequency voice coil diameter shall be 25 mm (1.0 in).

Performance specifications of a typi- cal production unit shall be as follows: Useable frequency response shall extend

Polar Plots

125 Hz

250 Hz

500 Hz

1,000 Hz

2,000 Hz

4,000 Hz

8,000 Hz

10,000 Hz

Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com

RS600i

Open-Ceiling Speaker