Kompernass KH 4418 manual Cleaning and care, Storage, Disposal

Page 10

13.Cleaning and care

Potentially fatal electrical shock:

Never open the appliance housing. There are no user-serviceable elements inside.

Never submerse the appliance into water or other liquids!

Cleaning the housing:

￿Clean the surface of the housing with a slightly moistened cleaning cloth.

First remove the plug.

Allow the appliance to cool down completely.

Ensure that no moisture can permeate into the appliance.

Cleaning the interior of the appliance:

With every lamination, contaminants are deposited on the rollers inside the laminator. Over time, this re- duces the performance of the laminator. You should therefore clean the rollers inside the laminator after use.

Prepare the appliance as described in Chapter 8 "Preparing for hot lamination", up to the point where the green indicator lamp "Ready" u glows.

Then run a sheet of DIN A4 paper, folded in the middle (maximum thickness 1.0 mm) …

without a laminating pouch and

with the fold first

… slowly into the slot for manual pouch input t.

Release the sheet as soon as you notice it being pulled in automatically.

The contaminants on the rollers inside the lami- nator are now transferred to this sheet of paper. The paper will be discharged from the pouch

ejector slot a of the laminator.

Repeat this cleaning process several times. Use a fresh clean sheet of paper each time.

When you no longer see any contaminants on the paper, the rollers inside the laminator are clean.

14. Storage

Allow the appliance to cool down completely before putting it into storage.

￿Do not store the laminator in damp loca- tions where moisture could enter inside the appliance. (E.g. cellars)!

15. Disposal

Do not dispose of the appliance with your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC.

Dispose of the appliance through an approved waste disposal centre or at your community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal centre.

Dispose of all packaging materials in an environmentally friendly manner.

- 8 -

Image 10
Contents Laminator Page Content Intended use Items supplied Technical DataAppliance description Safety instructions Risk of electrical shockOperating levels Suitable laminating pouches125 Preparing for hot lamination Laminator now heats itself up to the operating temperatureReady u glows Lamination process Green indicator lamp Ready u now glowIf you have previously performed hot lami- nation Trimming function Anti-Blocking Switch ABSOnly after hot lamination Storage Cleaning and careDisposal Any way by this warranty Warranty and Service ImporterRing not carried out by our authorized service Your goods be assured