Phase Technology IW500i specifications Key Features, Description, Applications

Page 1

IW500i

In-Wall Speaker

Technical Information for System Engineers

Specifications: IW500i

System Type

Impedance (nominal) 1

Sensitivity dB @ 2.83V/1M

Sensitivity dB @ 1W/1M 2

Frequency Response (- 3 dB) 3

Frequency Response (-10 dB) 3

Max. Program Power 4

Max. Continuous Power RMS 5

Max. Power SPL @ 1 M 6

Coverage Angle (-6 dB @ 2 kHz)

Coverage Angle (-6 dB @ 10 kHz)

Coverage Angle (Avg. 2 - 10 kHz)

Directivity Factor (Q)

Directivity Index (DI) dB

Tap Selector

Transducer - Low Frequency Driver

Transducer - High Frequency Driver

Low Frequency Voice Coil

Crossover Frequency

Network Type: Low Pass

Network Type: High Pass

Enclosure Material

Motor-board

Grille

Inputs

Colors

Height

Width

Depth

Weight

Shipping Weight

Included Accessories

Optional Accersories

Packaging

Regulatory - CE

1Impedance listed per IEC 60268-5 with a minimum less than 80% the nominal impedance

21w1m sensitivity determined using nominal impedance

3Frequency response measured in half or full space as dictated by speaker mounting configuration

4Max program power is 3 dB above max continuous power

5Continuous power rating, EIA-426-B test

6Max output based on max continuous power

7Max useable SPL based on testing by NWAA Labs

5.25" Coax, in wall, sealed (33 Watt transformer for 25/70.7/100 Volt or 8 Ohm direct)

8ohm 88.0 dB 88.0 dB

72Hz - 22 kHz

55Hz - 22 kHz

150w

75w 107.0 dB

80º horizontal / 120º vertical 120º horizontal / 120º vertical 115º horizontal / 115º vertical

4.2 (Averaged 100 HZ - 10 kHz) / 7.8 (2 kHz)

5.6 dB (Averaged 100 HZ - 10 kHz) / 8.9 dB (2 kHz)

6Position rotary switch with 8 ohm direct

1x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround

25mm (1in) Convex aluminum tweeter with waveguide 25.4 mm / 1.00 in

3.0 kHz

12dB per octave, 2nd order

12dB per octave, 2nd order

Injection molded ABS, glass fiber reinforced Cast aluminum

Powder coated steel Spring terminal White (only) Paintable 11.84 in / 300.7 mm 8.64 in / 219.5 mm 3.90 in / 99.1 mm 7.9 lb / 3.6 kg

10.0 lb / 4.5 kg

Paint mask, hole template Preconstruction bracket (AC-IW5-PCB)

1per box Approved

Transformer Taps

 

 

 

 

 

70.7 V

Output

 

100 V

Output

 

25 V

Output

 

 

33 w

103.0 dB

 

33 w

103.0 dB

 

5 w

95.0 dB

17 w

100.5 dB

 

17 w 100.5 dB

 

3 w

93.0 dB

9 w

97.5 dB

 

9 w

97.5 dB

 

1.3 w

89.0 dB

6 w

96.0 dB

 

6 w

96.0 dB

 

0.63 w

86.0 dB

3 w

93.0 dB

 

 

 

 

 

 

Key Features

BroadBeam® waveguide technology delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker (EASE™ documented).

One 133 mm (5.25 in) polypropylene woofer and one 25 mm (1 in) convex alu- minum tweeter with FerroFluid cooling mounted to an M5 Motorboard.

107 dB Max. SPL offers high output capa- bilities and reduced amplification costs.

Rapid installation blind-mount system for quick and secure installation.

Easy-access 6-position tap switch for 25, 70.7 & 100 Volt applications with voice coil/8 Ohm direct simplifies ordering & inventory tracking.

Included accessories: Mounting hardware, Paint mask, Hole template.

Optional accessory: pre-construction bracket (AC-IW5-PCB).

High-quality white paint finish. Custom paint colors optional.

Description

The IW500i is a 5.25” coax in-wall loud- speaker that delivers effective low-end response (55 Hz, -10 dB) and optimal off- axis performance (up to 10 kHz, EASE™ documented). SoundTube’s proprietary BroadBeam® waveguide tweeter system deliv- ers consistent high-performance audio across the operating bandwidth. The IW500i speaker design incorporates a low-profile grille and

6-position tap switch with an 8 Ohm bypass. Mounting hardware is included and features a fast and secure optimally engineered constant- tension mounting system. A pre-construction bracket is offered as an optional accessory.

Applications

Designed for in-wall applications, the IW500i is ideal for music and messaging in boardroom, church, corporate A/V, retail, hotel, hospital and education applications. For additional bass response down to 41 Hz (-10 dB), the CM1001d subwoofer may be used.

Patented SoundTube

Technologies

SoundTube Entertainment and the MSE Audio Group constantly develop new tech- nologies which enhance audio product performance. SoundTube Entertainment inno-

© 2008 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 11.04.08

Image 1
Contents Specifications IW500i Key FeaturesDescription ApplicationsArchitectural Specifications Technical Data Specification ToolsFrequency Response Phase/Impedance Reponse SoundTube EntertainmentVertical Beamwidth Horizontal BeamwidthDirectivity Index DI 125 Hz 250 Hz 500 Hz 000 Hz Polar Plots000 Hz 10,000 Hz

IW500i specifications

The Phase Technology IW500i is a high-performance in-wall speaker designed to deliver exceptional audio quality while seamlessly integrating into residential and commercial spaces. Engineered for discerning audiophiles and casual listeners alike, it combines innovative technologies with thoughtful features to create an immersive listening experience.

One of the standout features of the IW500i is its advanced driver configuration. It includes a 6.5-inch aluminum woofer, which provides powerful low-frequency response and a 1-inch titanium dome tweeter for crisp, clear highs. This dynamic pairing ensures a balanced sound profile, suitable for various music genres and home theater applications. The use of aluminum in the woofer not only enhances durability but also contributes to improved sound efficiency, reducing distortion even at higher volumes.

The IW500i is designed with Phase Technology's proprietary AirFlex™ technology, which maximizes the speaker's performance by controlling airflow within the enclosure. This innovative system minimizes turbulence and resonance, resulting in clearer sound reproduction across the frequency spectrum. Additionally, the speaker features a uniquely designed WaveGuide™ that disperses sound evenly throughout the listening space, enabling a more immersive experience without dead spots.

Installation is made convenient with the IW500i's easy-to-use mounting system. The speaker is equipped with durable dog-ear brackets that securely fasten the unit to the wall, ensuring stability and longevity. With a paintable grille, users can customize the speaker to match their décor, allowing for seamless integration into any environment.

To further enhance performance, the IW500i also incorporates a high-quality crossover network. This ensures that the right frequencies are directed to the appropriate drivers, optimizing the overall sound clarity and detail. The crossover is designed to handle higher power levels, making the IW500i suitable for use with a wide range of amplifiers, lending versatility to any audio setup.

The IW500i also prioritizes environmental sustainability, constructed from eco-friendly materials that reduce its carbon footprint. This commitment to sustainability, paired with exceptional sound quality and aesthetic flexibility, makes the Phase Technology IW500i a premium choice for those seeking top-tier in-wall audio solutions. Whether for a cozy home theater or an expansive living room, the IW500i promises to elevate any listening experience to new heights.