Mechanical Drawings, Installation | Phase Technology SM500i guide

SM500i Surface-Mount Speaker

Technical Information for System Engineers

Mechanical Drawings

216.6 mm (8.53 in)

316.9 mm (12.48 in)

245.9 mm (9.68 in)

nominal impedance of 8 Ohms and be avail- able for 25, 70.7 & 100 Volt modes with voice coil/8 Ohm direct. The frequency-dividing network shall have a crossover frequency of 3 kHz with slopes of 12 dB per octave (2nd order) for both low & high pass filters. Rated power capacity shall be at least 75 Watts continuous power (RMS) and conform to EIA-426-B testing. Maximum continuous output at 1 meter shall be 107.5 dB.

The low-frequency transducer shall have a polypropylene cone with butyl rubber sur- round. The high-frequency transducer shall be constructed of aluminium material with a proprietary BroadBeam® waveguide.

305.1 mm (12.01 in)

Installation

UnlockedLocked

SoundTube’s SM500i is a surface-mount speaker designed to mount to a wall, pole, ceiling or other rigid structure. Vertical & horizontal pivoting offer unlimited aiming for indoor & outdoor applications.

Optional Accessories

U-Mount Bracket (AC-SM-UB5)

Pole Mount Adaptor (AC-SM-PMA5)

Bent Shaft (AC-SM-BS5)

Installation for the SM500i shall be by a proprietary & corrosion-resistant captured- ball mounting system. SoundTube’s tool-free captured ball mounting system incorporates a locking zinc alloy lever attaching to a cast- aluminum ball. For seismic & safety redun- dancy, a secondary aircraft cable shall be included and attached to the speaker chassis via #10 bolt. The external wiring input con- nector shall be a 4-pin, 5 mm Euroblock for 8 Ohm or distributed systems and shall accept from 10 – 22 gauge wire. The system shall be for indoor/outdoor applications and shall have a weather-resistant terminal boot covering all wire connectors.

The enclosure shall be constructed of injection-molded, glass-reinforced ABS. The grille shall be constructed of iridite-plated, powder-coated aluminium for lasting performance.

Overall cabinet dimensions shall be no more than 316.9 mm (12.48 in) in height by 216.6 mm (8.53 in) in width by 305.1

mm(12.01 in) in depth (including SM bracket). The SM500i shall include Euroblock connector & weather boot.

The system shall be the SoundTube SM500i for both low & high impedance applications.

SoundTube Entertainment

6430 North Business Park Loop Park City, Utah 84098

Phone 435.647.9555

Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com

All SoundTube products come with a 5-year limited warranty.

SoundTube Entertainment manufactures a complete line of speakers for:

Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing

All SoundTube products are designed and engineered in the USA.