Banner American Products BA-EN45 manual VIII. Mounting & Laminating

Page 11

1.Load a roll of adhesive, with the liner wound to the outside, onto the top mandrel in the same manner as with laminating film.

2.Load a roll of paper on the bottom mandrel or use adhesive the same width as the mount board to keep the adhesive from accumulating on the rollers.

3.Place mount pins in holes. (Please see picture below).

4.Set the temperature to approximately 125°F. The Entry 4500 will take approximately 10-15 minutes to reach operating temperature. The roller temperatures are indicated on the LCD displays.

5.Feed the uncoated mount board into the laminator behind a small leader board. The leader board will prevent the compression of the leading edge of your mount board.

6.You may coat subsequent boards now, one directly behind the other, so that the board in front becomes the leader board. We recommend that you coat a sufficient supply of mount board in one session so you’ll have it ready for future use.

VIII. Mounting & Laminating...

1.Be sure all laminator parts (i.e. safety shield, feed table, etc.) are in their proper positions and the laminat- ing film is loaded correctly (See page 3 for film loading instructions).

2.Place mounting pins in proper holes.

3.Turn the TEMPERATURE CONTROL switch to the ON position.

4.Set the temperatures according to the film manufacturer’s recommendations for the film you have chosen. The Entry 4500 will take approximately 10-15 minutes to reach operating temperature. The temperature of the heated rollers are indicated on the LCD display.

5.Turn the MOTOR switch ON and perform a test mount to ensure proper settings for successful mounting. If any adjustments are necessary make them now and run another test. Repeat this step until you obtain desired results.

6.Position the print to be mounted on a section of mount board up to ¼” thick behind a leader board. The leader board will prevent compression of the leading edge of your mount board.

8.Feed the print and mount board into the laminator behind the leader board slowly and evenly. Be sure to pull back the release liner before it enters the rollers.

9.You may mount subsequent prints now, one directly behind the other so that the board in front becomes the leader board.

10.Once your last print has completely exited the laminator, turn the MOTOR switch OFF and use a razor to remove the mounted and laminated prints.

7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No. BA-EN45 Page Table of Contents Entry 4500 BA-EN45 MandrelII. Electrical Safeguards For your safetyAppropriate Location III. SpecificationsIV. Set-up InspectionBottom Mandrel Threading the Film Figures 1&2Thermal Laminating Mandrel Tension AdjustmentRewind Option for Pressure Sensitive Laminating VII. Coating Mount Board VI. Pressure Sensitive LaminatingVIII. Mounting & Laminating Removing Wrap-Arounds IX. Maintenance/ServicePrecautions Cleaning Rubber RollersSymptom Possible Cause Corrective Action Trouble-shootingReturn Policy XII. Warranty & Return PolicyWarranty Do’s and Don’tsPart Number Description Quantity XIII. Parts List and IllustrationsKNOB, Thermostat Exploded Assembly

BA-EN45 specifications

Banner American Products has long been a leader in the manufacturing of innovative and effective solutions for various industrial needs. One of their standout products is the BA-EN45, a versatile and efficient equipment designed for a variety of applications. This article delves into the main features, technologies, and characteristics of the BA-EN45, giving readers a clear understanding of its benefits.

The BA-EN45 is built with a robust design, ensuring durability and long-term performance in challenging environments. Its reinforced structure provides resistance to impacts and harsh conditions, making it ideal for industrial settings where reliability is paramount. The compact design also allows for easy integration into existing systems and workflows, enhancing productivity without requiring significant alterations to current setups.

One of the defining features of the BA-EN45 is its advanced sensing technology. Equipped with state-of-the-art sensors, it offers high precision and responsiveness. This technology enables accurate detection and monitoring, reducing the likelihood of errors and increasing operational efficiency. The intelligent sensing capabilities are particularly beneficial in automated processes, where timely information is crucial for optimal performance.

In addition to its sensing technology, the BA-EN45 boasts a user-friendly interface. Its intuitive controls and display options ensure that operators can easily navigate functions and settings, facilitating quick adjustments and enhancing usability. The product also supports various connectivity options, allowing integration with other systems and real-time data sharing, which is essential for modern industrial ecosystems.

Another notable characteristic of the BA-EN45 is its energy efficiency. Designed with sustainability in mind, it minimizes energy consumption without compromising performance. This attribute not only reduces operational costs but also aligns with the growing emphasis on environmentally friendly practices within industries.

Furthermore, the BA-EN45 is backed by rigorous testing and quality assurance processes, ensuring that each unit meets the highest standards of performance and reliability. Its long lifespan and low maintenance requirements make it a cost-effective choice for businesses looking to enhance their operational capabilities without substantial investment in ongoing upkeep.

In conclusion, the Banner American Products BA-EN45 is a cutting-edge solution that combines durability, advanced technology, and user-friendly design. Its impressive features make it an excellent choice for various industrial applications, positioning it as a valuable asset for organizations aiming to improve efficiency and reliability in their operations.
Top Page Image Contents