ABC Office 35 EZload manual General safeguards, Electrical safeguards

Page 4

Important Safety instructions ￿

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.

￿THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN THIS INSTRUCTION MANUAL.

ON THE PRODUCT YOU WILL FIND IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES AND INSTRUCTIONS CAREFULLY. SAVE THESE INSTRUCTIONS FOR LATER USE.

THE FOLLOWING WARNINGS ARE FOUND ON THIS PRODUCT.

￿￿ElectricalWARNINGshock hazard.

Do not open. No user serviceable parts inside.

Refer servicing to qualified service personnel.

This safety message means that you could be seriously hurt or killed if you open the product and expose yourself to hazardous voltage.

￿CAUTION

HOT ROLLS.

PINCH POINT.

Keep hands and

clothing away.

This safety message means that you could be burned and your fingers and hands could be trapped and crushed in the hot rollers. Clothing, jewelry and long hair could be caught in the rollers and pull you into them.

￿CAUTION

SHARP BLADE.

Keep hand and

fingers away.

This safety message means that you could cut yourself if you are not careful.

￿WARNING: THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN THIS INSTRUCTION MANUAL. THIS SYMBOL INDICATES A POTENTIAL PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR OTHERS, AS WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY DAMAGE.

￿WARNING: DO NOT ATTEMPT TO SERVICE OR REPAIR THE LAMINATOR.

￿WARNING: DO NOT CONNECT THE LAMINATOR TO AN ELECTRICAL SUPPLY OR ATTEMPT TO OPERATE THE LAMINATOR UNTIL YOU HAVE COMPLETELY READ THESE INSTRUCTIONS. MAINTAIN THESE INSTRUCTIONS IN A CONVENIENT LOCATION FOR FUTURE REFERENCE.

Important Safeguards

￿

￿WARNING: FOR YOUR PROTECTION, DO NOT CONNECT THE LAMINATOR TO ELECTRICAL POWER OR ATTEMPT TO OPERATE UNTIL YOU READ THESE INSTRUCTIONS COMPLETELY. KEEP OPERATING INSTRUCTIONS IN A CONVENIENT LOCATION FOR FUTURE REFERENCE. TO GUARD AGAINST INJURY, THE FOLLOWING BASIC SAFETY PRECAUTIONS MUST BE OBSERVED IN THE SET-UP AND USE OF THE LAMINATOR.

General safeguards

Use this laminator only for its intended purposes as according to the specifications outlined in the operating instructions.

Keep hands, long hair, loose clothing and articles such as necklaces or ties away from the front of the pull rollers to avoid entanglement and entrapment.

Avoid contact with the heat shoes during operation or shortly after the laminator has been turned off. The heat shoes can reach temperatures in excess of 300ºF.

Keep hands and fingers away from the path of the sharp film cutter blade located at the film exit.

Do not place the laminator on an unstable cart, stand or table. An unstable surface may cause the laminator to fall resulting in serious bodily injury. Avoid quick stops, excessive force and uneven floor surfaces when moving the laminator on a cart or stand.

Do not defeat or remove electrical and mechanical safety equipment such as interlocks, shields and guards.

Do not insert objects unsuitable for lamination.

Do not expose laminator to liquids.

Electrical safeguards

This laminator must be connected to a supply voltage corresponding to the electrical rating as indicated on the serial plate located on the rear of the machine.

Unplug the laminator before moving it, or when it is not in use for an extended period of time.

Do not operate the laminator with a damaged power supply cord or plug.

Do not overload electrical outlets as this can result in fire or shock.

Do not alter the attachment plug. This plug is configured for the appropriate electrical supply.

The unit is intended for indoor use only.

￿CAUTION: The receptacle must be located near the equipment and easily accessible. Do not use an extension cord.

Disconnect the attachment plug from the receptacle to which it is connected and keep the power supply cord in your possession while moving the laminator.

Do not operate the laminator with a damaged power supply cord or attachment plug, upon occurrence of a malfunction, or after laminator has been damaged. Contact an authorized GBC service representative for assistance.

ABC Office800.658.8788www.abcoffice.com

4

Image 4
Contents ABC Office 800.658.8788 ABC Office 800.658.8788 ABC Office 800.658.8788 General safeguards Electrical safeguardsService InstallationClean the top and bottom heat shoes with a soft cloth Caring for the Ultima 35 EZloadFeatures Guide Control Panel figureFeed Table Latch a Feed Table Guide aFilm Loading and Threading Close the four film holder leversSpecifications OperationClearing a Film Jam Wrap-Up Lamination GuideWarranty Counter-clockwiseLaminated items are cloudy Insufficient heat ClockwiseABC Office 800.658.8788