Phase Technology CM590i specifications Key Features, Description, Applications

CM590i	In-Ceiling Speaker
	Technical Information for System Engineers

Specifications: CM590i					Tile bridge included
System Type			5.25” Coax, in-ceiling, ported (33 Watt transformer
			for 25 /70.7/100 Volt or voice coil / 8 Ohm direct)
Frequency Response (- 3 dB)1			77 Hz - 22 kHz
Low Frequnecy (-10 dB)1			69 Hz - 20 kHz
Max. Program Power			160 Watts
Max. Continuous Power RMS			80 Watts
Max. UL Power Rating3			55 Watts
Max. SPL dB @ 1 M			109 dB
Sensitivity dB @ 1W/1M4			90 dB
Impedance (nominal)			8 Ohm (nominal value)
Coverage Angle (-6 dB @ 500 Hz)			180º (average)
Coverage Angle (-6 dB @ 4 kHz)			102º (average)
Directivity Factor (Q)			7.7 (Averaged 100 Hz - 10 kHz); 11.17 @ 2 kHz
Directivity Index (DI)			8.04 dB (Averaged 100 Hz - 10 kHz); 10.48 dB @ 2 kHz
Tap Selector			6-Position rotary switch with voice coil/8 Ohm direct
Transformer Taps
70.7 V	Output	100 V	Output	25 V	Output
33 W	105 dB	33 W	105 dB	5 W	97 dB
17 W	102.5 dB	17 W	102.5 dB	2.5 W	94 dB
9 W	99.5 dB	9 W	99.5 dB	1.3 W	91 dB
6 W	98 dB	6 W	98 dB	0.63 W	88 dB
3 W	95 dB
Transducers
Low Frequency Driver			1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround
High Frequency Driver			25 mm (1.0 in) Convex aluminum horn-loaded tweeter
Low Frequency Voice Coil			25 mm (1.0 in)
Crossover Frequency			3 kHz
Network Type
Low Pass			N/A
High Pass			12 dB per octave, 2nd order
Enclosure Material			Drawn aluminum backcan with ABS baffle
Motor Board			Cast aluminum
Grille			Iridite-plated steel with powder-coat finish
Inputs			4 Pin, 5 mm Euroblock for individual or daisy chain connection
Colors			Black or white
Backcan Diameter			197 mm / 7.75 in
Backcan Height			219.2 mm / 8.63 in
Visible Diameter			271.9 mm / 10.71 in
Visible Height			24.5 mm / .96 in
Weight			3.4 kG / 7.5 lbs
Shipping Weight			10.7 kG / 23.5 lbs (2 per box, includes tile bridges)
Accessories
Included			Tile bridge, Euroblock connector, installation aid, paint mask
			& conduit plate
Optional			Pre-Construction Bracket (AC-CM5-PCB),
			Junction Box (AC-CM-JBOX)
Packaging			2 Per box, can ship as single

1Frequency response is measured in half space and includes a low-frequency peak > + 3 dB.

2 Continuous power rating, EIA-426-B test.

3 UL testing specifies band-limited pink noise over the indicated frequency spectrum. 4 2.83 Volts at a distance of 1 meter.

SoundTube continually develops new product innovations and improvements. Updates to existing products without prior notice are an example of SoundTube’s drive for constant improvement.

Key Features

•High power output (109 dB) for longer throw and higher SPL requirements.

•One 133 mm (5.25 in) polypropylene woofer and one 25 mm (1.0 in) horn- loaded convex aluminum dome tweeter mounted to a proprietary cast-alumi- num HP5TM baffle & heat sink.

•90 dB Average sensitivity offers high output capabilities and reduced amplifi- cation costs.

•Rapid installation blind-mount, fixed- wing mechanism with constant tension design affixing to ceiling thickness tol- erances rangeing from 6.4 mm (0.25 in) to 42.9 mm (1.69 in).

•Magnetic grille attachment with safety cable.

•Easy access 6-position selectable tap switch for 25, 70.7 & 100 Volt applica- tions with voice coil/8 Ohm direct sim- plifies ordering and inventory tracking.

•UL 1480 rev. 5 & 2403, CE (EMC Directive 89/366/EEC, EN55020, EN55013), Milspec 810 or IEC529 approval pending.

•Included accessories: Tile bridge, Euro- block connector, installation aid, paint mask and conduit plate.

•Optional accessories: Pre-Construction Bracket and Junction Box.

•High quality black or white paint finish. Custom paint colors optional.

Description

The CM590i is a high-powered 5.25” 2-way loudspeaker in a ported in-ceiling enclosure design. The CM590i incorporates a low-profile grille, proprietary HP5TM motor-board and 6-position tap switch with voice coil/8 Ohm direct. A tile bridge is included and the speaker features a fast- action SpeedWingTM for easy and secure installation.

Applications

Engineered for high-SPL and effective low-end response (69 Hz @ - 10 dB), the CM590i delivers consistent high-perfor- mance music and paging for applications requiring longer throw or higher volume above the existing ambient noise level. The CM590i is ideal for in-ceiling sound rein- forcement/PA in applications with high ambient noise levels including casinos, warehouses, airports, transportation & ship- ping centers, schools, gyms, arenas and sta- diums. For additional bass down to 43 Hz (-10 dB) the CM801i subwoofer may be used.

© 2006 SoundTube Entertainment. All rights reserved. PN TS-CM590 REV 03.03.06