Oki PAGE 24 quick start Make Connections, Back and forth, Power Connection, Serial Port

3 Install the Toner (“Type 7,” OKI P/N 40468801)

Unwrap the toner cartridge.

Shake it	Remove the tape.
back and forth.

1

Place the black end under the	Push the lock lever toward
tab (1), then lower the gray	the back of the printer as far
end into the toner well.	as it will go.

Close the cover.

4 Make Connections

!For more information, see “Interfacing with the Computer” under Printer Controls in the on-line User’s Guide.

Power Connection

Plug in the power cord.

Parallel Port (LPT) Connection

(Non-Network Models)

Requires a bidirectional parallel printer cable marked IEEE 1284-compliant; the cable is not supplied.

Network Connection (Network models Only): 3

1￿Pigtail (supplied with network models):

Attach to the OkiLAN port (2) and to the printer’s parallel port (3) .

Note! Do not connect to the printer’s serial port.

4 ￿Ethernet Cable, not supplied	4		Serial Port
PC: Requires Ethernet cable with two twisted wire pairs and an
RJ45 plug.		2
Macintosh: Requires Ethernet crossover cable with RJ45		1
connectors at either end.

3