Phase Technology CM600i Patented SoundTube Technologies, Technical Data Specification Tools

Page 3

CM600i

In-Ceiling Speaker

Technical Information for System Engineers

Patented SoundTube

Technologies

SoundTube Entertainment is con- stantly developing new technologies that enhance audio product performance. SoundTube Entertainment innovations are protected by multiple U.S. & international patents, which explicitly cover SoundTube dome, enclosure and dispersion technolo- gies. SoundTube Entertainment actively defends its patents in order to protect SoundTube resellers and end users.

Technical Data and

Specification Tools

Technical Data

SoundTube Entertainment strives to provide complete and effective techni- cal information and data to dealers, engineers and designers. All data are available from SoundTube Entertain- ment or at www.soundtube.com.

Data Acquisition

All performance data acquired at SoundTube’s Technical Measurement Center (TMC) are analyzed using a variety of standard measurement tech- niques, including Measured Length

Sequence (MLS) and Time Delay Spectrometry (TDS). Performance, development and data acquisition tools include: Gold Line TEF 20, CLIO, LMS, LEAP, and proprietary modeling software. EASEdata are acquired through an automated TEF 20/Out- line/EASEinterface.

EASE™ Data 3-D polar plots.

SoundTubeSPEC™ – Proprietary SoundTube speaker placement software.

Architectural Specifications

The loudspeaker shall consist of a 165

mm(6.5 in) low-frequency transducer and a 25 mm (1.0 in) high-frequency transducer with a crossover network installed in the ported enclosure. The low-frequency voice coil diameter shall be 25 mm (1.0 in).

Performance specifications of a typical production unit shall be as fol- lows: Useable frequency response shall extend from 60 Hz – 22 kHz (-10 dB, half space, no external equalization). Measured sensitivity (2.83 Volt input, 1 meter) shall be at least 91.5 dB. The speaker shall have a nominal imped-

ance of 8 Ohms and be available for 25, 70.7 & 100 Volt modes with voice coil/8 Ohm direct. The frequency- dividing network shall have a cross- over frequency of 3 kHz with slopes of 12 dB per octave (2nd order) for both low & high pass filters. Rated power capacity shall be at least 90 Watts con- tinuous power (RMS) and conform to EIA-426-B testing. Maximum continu- ous output at 1 meter shall be 111 dB.

Installation for the CM600i shall be by 2-screw blind-mount, constant-ten- sion winged assembly and shall attach to ceiling thickness tolerances ranging from 6.4 mm (0.25 in) to 42.9 mm (1.69 in). The fixed-wing assembly shall be constructed of glass filled ABS material. The external wiring input connector shall be a 4-pin, 5 mm Euroblock for 8 Ohm or distributed systems and shall accept from 10 – 22 gauge wire.

The maximum backcan dimensions shall be no more than 201.7 mm (7.94 in) in height by 296.7 mm (11.68 in) in diameter. The maximum visible dimen- sions shall be no more than 27.5 mm (1.08 in) in height by 375 mm (14.76 in) in diam-

Polar Plots

125 Hz

250 Hz

500 Hz

1,000 Hz

2,000 Hz

4,000 Hz

8,000 Hz

10,000 Hz

Technical data, EASEplots, SoundTubeSPECsoftware & product downloads available at www.soundtube.com

Image 3
Contents Key Features Specifications CM600iDescription BroadBeam Wide Dispersion Technology ApplicationsTechnical Data Specification Tools Architectural SpecificationsPatented SoundTube Technologies Optional Accesories SoundTube EntertainmentEter. The backcan shall be constructed of alu- minum

CM600i specifications

The Phase Technology CM600i is a remarkable speaker system that embodies advanced audio engineering and cutting-edge technology, making it an exceptional choice for audiophiles and home theater enthusiasts alike. Designed with a focus on performance and versatility, the CM600i integrates a wide range of features that ensure high-quality sound reproduction.

One of the standout characteristics of the CM600i is its two-way design, which includes a 6.5-inch polypropylene woofer and a 1-inch soft dome tweeter. This combination allows the speaker to deliver rich, dynamic bass while providing clear and detailed highs. The woofer’s advanced cone technology enhances sound dispersion, ensuring that audio is balanced and immersive across a broad listening area.

Phase Technology has incorporated several innovative technologies into the CM600i to optimize its performance. The speaker is equipped with phase-aligned crossovers that minimize distortion and ensure a seamless transition between the woofer and tweeter. This results in a coherent soundstage that allows listeners to experience music and movies with unmatched clarity.

The CM600i also features a unique design that blends seamlessly into any environment. Its low-profile, wall-mountable design makes installation easy and flexible, allowing users to position the speakers to achieve the best acoustics in their space. Moreover, the durable cabinet construction and elegant finish add an aesthetic appeal that complements a variety of interior styles.

Another key feature of the CM600i is its compatibility with a wide range of audio systems. Whether connecting to a home theater receiver or a high-fidelity stereo system, these speakers are designed to perform well with various setups, making them an adaptable choice for users with different audio preferences.

In addition to its sound quality and design, the CM600i is engineered to handle substantial power, with a continuous power handling capability that accommodates dynamic audio signals. This ensures that the speakers can deliver robust performance without distortion, even at high volumes.

Overall, the Phase Technology CM600i stands out as a high-quality speaker system that combines advanced audio technologies, thoughtful design, and exceptional performance. Whether for music listening or immersive home theater experiences, the CM600i promises to elevate any audio environment, making it a worthy investment for sound enthusiasts.